alsa-mixer: add support for Asus Xonar SE

spa/plugins/alsa/90-pipewire-alsa.rules

@@ -181,6 +181,9 @@ ATTRS{idVendor}=="1395", ATTRS{idProduct}=="008a", ENV{ACP_PROFILE_SET}="usb-gam
 # have any digital outputs.
 ATTRS{idVendor}=="0a12", ATTRS{idProduct}=="4007", ENV{ACP_PROFILE_SET}="analog-only.conf"
 
+# Asus Xonar SE
+ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="189d", ENV{ACP_PROFILE_SET}="asus-xonar-se.conf"
+
 GOTO="pipewire_end"
 
 LABEL="pipewire_check_pci"

spa/plugins/alsa/mixer/profile-sets/asus-xonar-se.conf

@@ -0,0 +1,79 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; ASUS Xonar SE card.
+; This card has two devices for each rear and front panel jacks.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = yes
+
+[Mapping analog-stereo-front]
+description = Analog Stereo Front
+device-strings = hw:%f,1
+channel-map = left,right
+paths-output = analog-output analog-output-headphones
+paths-input = analog-input-mic analog-input-headphone-mic analog-input-headset-mic
+priority = 15
+
+[Mapping analog-stereo-rear]
+description = Analog Stereo Rear
+device-strings = hw:%f,0
+channel-map = left,right
+paths-output = analog-output analog-output-speaker
+paths-input = analog-input analog-input-mic analog-input-linein
+priority = 14
+
+[Mapping analog-surround-21]
+device-strings = surround21:%f
+channel-map = front-left,front-right,lfe
+paths-output = analog-output-speaker
+priority = 13
+direction = output
+
+[Mapping analog-surround-40]
+device-strings = surround40:%f
+channel-map = front-left,front-right,rear-left,rear-right
+paths-output = analog-output-speaker
+priority = 12
+direction = output
+
+[Mapping analog-surround-41]
+device-strings = surround41:%f
+channel-map = front-left,front-right,rear-left,rear-right,lfe
+paths-output = analog-output-speaker
+priority = 13
+direction = output
+
+[Mapping analog-surround-50]
+device-strings = surround50:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center
+paths-output = analog-output-speaker
+priority = 12
+direction = output
+
+[Mapping analog-surround-51]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = analog-output-speaker
+priority = 13
+direction = output
+
+[Mapping iec958-stereo]
+device-strings = iec958:%f
+channel-map = left,right
+paths-output = iec958-stereo-output
+priority = 5