By:
- stripping extensions from relative icon filenames (for example,
gdmap.desktop has "Icon=gdmap_icon.png")
- using the WM_CLASS "instance" rather than "class" string, which
is usually the same but lowercase
Fixes a bug that `zwlr_foreign_toplevel_handle_v1::output_enter` is not
sent when a xwayland surface is re-mapped (e.g. opening Slack desktop
app when it's running in background).
Currently, initially maximized (or fullscreen) xdg-shell views exhibit
one of two issues:
- some (e.g. GTK and Qt apps) paint an initial frame un-maximized
(before the "map" event) and only maximize in a later commit
- others (e.g. foot) maximize immediately without flicker, but never
store a valid natural size, so we end up using a fallback (640x480)
Under KWin, neither of these issues occur, so I looked into what labwc
is doing wrong. It seems that:
- wlroots internally sends an initial configure event with a size of
0x0 to all xdg-shell views. This requests the client to set its own
preferred (a.k.a. natural) size.
- For an initially maximized/fullscreen view, the initial configure
event should contain the maximized/fullscreen size rather than 0x0.
In labwc, this means we have to call wlr_xdg_toplevel_set_size()
earlier, i.e. from the new_surface event. Tracing with WAYLAND_DEBUG
shows that the initial configure event now has the correct geometry,
matching KWin behavior. With this change, GTK and Qt apps no longer
paint an incorrect un-maximized frame.
- However, this means that all xdg-shell views now suffer from the same
issue as foot, where we never receive a commit with the un-maximized
(natural) geometry. The correct way to get the natural geometry seems
to be to wait until we want to un-maximize, and send a configure
event of 0x0 at that point.
Sending a configure event of 0x0 when un-maximizing is a bit annoying as
it breaks some assumptions in labwc code. In particular:
- view->natural_geometry may now be unknown (0x0), requiring various
wlr_box_empty() checks sprinkled around. I added these in all the
obvious places, but there could be some code paths that I missed.
- Positioning the newly un-maximized view within view_maximize() no
longer works since we don't know the natural size. Instead we have to
run the positioning logic from the surface commit handler. This
results in some extra complexity, especially for interactive move.
See the new do_late_positioning() function in xdg.c.
Some TODOs/FIXMEs (non-blocking in my opinion):
- The view_wants_decorations() check is now duplicated in both the
new_surface and map event handlers. I'm not sure if this is necessary
but it seemed like the safest approach for now. More testing would be
nice, particularly with various combinations of config and client SSD
preferences.
- Aside from the interactive move case, the "late positioning" logic
always centers the view when un-maximizing, and does not invoke any
of the smart placement logic. If we want to invoke smart placement
here, I'd appreciate someone with more knowledge of that code to take
a look and figure out how to do that correctly.
Set the initial geometry of maximized/fullscreen views before
actually mapping them, so that they can do their initial layout and
drawing with the correct geometry. This avoids visual glitches and
also avoids undesired layout changes with some apps (e.g. HomeBank).
Fixes: #1320
v2: ensure valid geometry for unmanaged->managed case
As wlr_xwayland caches the pixel data when not yet started
up due to the delayed lazy startup approach, we do have to
re-set the xwayland cursor image when reloading the cursor
theme. Otherwise the first X11 client connected will cause
the xwayland server to use the cached (and destroyed) pixel
data.
To reproduce:
- Compile with b_sanitize=address,undefined
- Start labwc (nothing in autostart that could create
a X11 connection, e.g. no GTK or X11 application)
- Reconfigure
- Start some X11 client
Before this patch, labwc would happily kill itself when the user
called the `Kill` action when any xwayland view had focus.
The reason this happened was that wlroots creates the xwayland
wayland client via socketpair() and thus a lookup of the pid
of the socket connection would return the pid of labwc itself.
This patch fixes that by implementing different pid lookup
mechanisms based on the view implementation backend.
Fixes: #1739
This allows to ignore X11 client side configure requests
like positioning and resizing and can be used to fight
some X11 applications that persist to have their windows
spawn at specific places and sizes.
Fixes: #1446
...for example `Fall Guys`. It is believed to be caused by setting
override-redirect on an xwayland-surface with a child window, thus
breaking the way root-toplevels are obtained.
```
(threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0)
at pthread_kill.c:44
at pthread_kill.c:78
(fmt=0x7739d9f9bb68 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=assertion@entry=0x5a76573f9222 "root", file=file@entry=0x5a76573f9606 "../labwc/src/view.c", line=line@entry=2013, function=function@entry=0x5a7657400320 <__PRETTY_FUNCTION__.14> "view_move_to_front") at assert.c:94
(assertion=assertion@entry=0x5a76573f9222 "root", file=file@entry=0x5a76573f9606 "../labwc/src/view.c", line=line@entry=2013, function=function@entry=0x5a7657400320 <__PRETTY_FUNCTION__.14> "view_move_to_front") at assert.c:103
at ../labwc/src/view.c:2013
at ../labwc/src/view-impl-common.c:30
at ../labwc/src/xwayland.c:677
at ../wayland-1.22.0/src/wayland-server.c:2241
(signal=signal@entry=0x5a7659025160, data=data@entry=0x5a7659024e90)
at ../wayland-1.22.0/src/wayland-server.c:2241
at ../subprojects/wlroots/types/wlr_compositor.c:493
(cif=cif@entry=0x7ffc74d32530, fn=<optimized out>, rvalue=<optimized out>, avalue=<optimized out>, closure=closure@entry=0x0) at ../src/x86/ffi64.c:673
(cif=cif@entry=0x7ffc74d32530, fn=<optimized out>, rvalue=rvalue@entry=0x0, avalue=avalue@entry=0x7ffc74d32600) at ../src/x86/ffi64.c:710
(closure=closure@entry=0x5a7658f5adc0, target=<optimized out>,
target@entry=0x5a7659025240, opcode=opcode@entry=6, data=<optimized out>,
data@entry=0x5a7658609820, flags=2) at ../wayland-1.22.0/src/connection.c:1025
(fd=<optimized out>, mask=<optimized out>, data=<optimized out>)
at ../wayland-1.22.0/src/wayland-server.c:438
(loop=0x5a7657816e60, timeout=timeout@entry=-1)
at ../wayland-1.22.0/src/event-loop.c:1027
at ../wayland-1.22.0/src/wayland-server.c:1493
at ../labwc/src/main.c:179
```
Reported-by: @kode54
These views (notifications, floating toolbars, etc.) should not be
shown in taskbars/docks/etc. (which are the stated use-case of the
wlr-foreign-toplevel protocol).
Move/resize requests from xwayland views and xdg toplevels should be
ignored when the view is not pressed.
This is relevant for touchpad taps with <tapAndDrag> disabled.
When the user taps the client surface (e.g. chromium and mpv) with the
setting above, libinput sends button press & release signals so quickly
that the compositor receives move/resize request from the client AFTER
the button release signal is processed, so `interactive_finish()` is
never called.
For unknown reasons, XWayland surfaces that are completely offscreen
seem not to generate commit events. In rare cases, this can prevent an
offscreen window from moving onscreen (since we wait for a commit event
that never occurs). As a workaround, move offscreen surfaces
immediately.
This fixes an issue that I can reproduce by having qmpanel displayed on
a (larger) external monitor, then undocking the laptop so that qmpanel
requests a simultaneous move+resize to the (smaller) laptop display.
Account for space taken up by XWayland panels (as indicated by the
_NET_WM_STRUT_PARTIAL property) in the usable_area calculation.
This makes it possible to use labwc in a "transitional" setup, where it
replaces the X11 window manager and compositor, but most other parts of
a existing X11 desktop environment can still be used via XWayland.
(Some remaining drawbacks of such a setup would be the lack of desktop
icons, and native Wayland clients not showing up in X11-based taskbars.)
XWayland clients use the _NET_WORKAREA root window property to determine
how much of the screen is not covered by panels/docks. The property is
used for example by Qt to determine areas of the screen that popup menus
should not overlap (see QScreen::availableVirtualGeometry).
Depends on wlroots MR:
https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/4406
v2: prevent calling wlr_xwayland_set_workareas() too early
v3: fix segfault at exit (server->xwayland == NULL)
Need to handle new unified mapping, where mapping is attached to the
wlr_surface objects instead of their parents. Also, most of them require
a new associate event for xsurface objects, their surface member will be
NULL before this event is received.
Refactored by jlindgren:
- add struct mappable
- unify map/unmap logic
...as it needs to be set before honouring xwayland_surface->fullscreen
because that calls desktop_update_top_layer_visiblity() which relies on
view->surface being set in view_is_focusable() since 13d0b14.
Fix bug introduced by PR #1237 which fails to hide the xfce4-panel (or
any other layer-shell client in the top layer) whilst gaming in
fullscreen. The bug can be observed with the following games:
- Alan Wake 2 (wine)
- Starfield (steam+proton)
- Cyberpunk (steam+proton)
- Quake 1 Remaster (steam-native)
Fixes: #661 (the last bit of it)
Reported-by: @ScarecrowDM
Helped-by: @Consolatis
Reproduce issue by:
1. Run an XWayland client
2. ToggleDecorations twice to hide deco
3. Minimize/unminimize from panel
4. Observe that deco is back
Reported-by: @Consolatis
Until we expose the workspaces to xwayland we need a way to
ensure that xwayland views on the current workspace are always
stacked above xwayland views on other workspaces.
If we fail to do so, issues arise in scenarios where we change
the mouse focus but do not change the (xwayland) stacking order.
Reproducer:
- If followMouse is enabled, raiseOnFocus must be disabled
- Open at least two xwayland windows which allow scrolling
(some X11 terminal with 'man man' for example)
- Switch to another workspace, open another xwayland window
which allows scrolling and maximize it
- Switch back to the previous workspace with the two windows
- Move the mouse to the xwayland window that does *not* have
focus
- Start scrolling
- All scroll events should end up on the maximized window on
the other workspace
This patch fixes the issue by simply raising all windows from
the current workspace again in their original stacking order
when switching workspaces.
Reported-by: Domo via IRC (thanks!)
The top_left_edge_boundary_check() function in xwayland.c ensures that
views trying to position themselves at 0,0 don't end up with a titlebar
offscreen. However, it doesn't take into account the usable area and
thus these views can still end up overlapping a top panel.
Also, there is no good reason for top_left_edge_boundary_check() to be
xwayland-specific. This logic should really be part of
view_adjust_for_layout_change().
To fix all this, add a new view_adjust_floating_geometry() function,
which replaces the existing similar (and duplicated) logic in
view_apply_natural_geometry() and view_adjust_for_layout_change().
view_adjust_for_layout_change() is already being called from xwayland's
set_initial_position(), so top_left_edge_boundary_check() is now
redundant and can just be deleted.
Lightly tested with waybar and feh --geometry 640x480+0+0. The feh
window is now correctly positioned below waybar, even if started before
waybar (in that case, the feh window is moved when waybar starts).
This is a useful (if lesser-known) feature of at least a few popular X11
window managers, for example Openbox and XFWM4. Typically right-click on
the maximize button toggles horizontal maximize, while middle-click
toggles vertical maximize.
Support in labwc uses the same configuration syntax as Openbox, where the
Maximize/ToggleMaximize actions have an optional "direction" argument:
horizontal, vertical, or both (default). The default mouse bindings match
the XFWM4 defaults (not sure what Openbox has by default).
Most of the external protocols still assume "maximized" is a Boolean,
which is no longer true internally. For the sake of the outside world,
a view is only "maximized" if maximized in both directions.
Internally, I've taken the following approach:
- SSD code decorates the view as "maximized" (i.e. hiding borders) only
if maximized in both directions.
- Layout code (interactive move/resize, tiling, etc.) generally treats
the view as "maximized" (with the restrictions that entails) if
maximized in either direction. For example, moving a vertically-
maximized view first restores the natural geometry (this differs from
Openbox, which instead allows the view to move only horizontally.)
v2: use enum view_axis for view->maximized
v3:
- update docs
- allow resizing if partly maximized
- add TODOs & corrections noted by Consolatis
Currently xwayland views are restacked on top of the XWayland server
stacking order when activated (i.e. focused). This is wrong because
focus/raise are independent concepts (though often occurring together).
The stacking order should be updated when the view is raised/lowered,
not when the view is focused.
Work is in progress elsewhere (draft PR) that will result in views more
often being raised without being focused. Without this fix, those views
don't get restacked properly, resulting in clicks "passing through" to
views underneath.
The logic was the same for xdg-shell and xwayland views, so move it from
the view->impl layer out to the view_move_to_front/back() functions.
view->impl->move_to_front/back() still exist for now, in case we want to
add xdg/xwayland-specific logic in future, but they now move only one
view and not sub-views.
This makes the code a bit more readable IMHO (and forces us to be
consistent with event handler function names).
Adjust scripts/checkpatch.pl to not complain.
