Add a new config option, desktop-notifications.close, defining what to
execute to close a notification. It has a single template parameter,
${id}, that is expanded to the external notification ID foot may have
picked up from the notification helper.
notify-send does not support closing notifications, and it appears
impossible to pass an *unsigned* integer as argument to gdbus. Hence
no default value for the new 'close' option.
Example:
printf '\e]99;i=123;this is a notification\e\\'
printf '\e]99;i=123:p=close;\e\\'
Split it up into two, ${action-name} and ${action-label}.
Dunstify, for example, has a different syntax compared to notify-send:
notify-send: default=foobar
dunstify: default,foobar
Only do it when the notification was activated.
Here, activated means the 'click to activate' notification action was
triggered.
How do we tie everything together?
First, we add a new template parameter, ${action}. It's intended to be
used with e.g. notify-send's --action option.
When the action is triggered, notify-send prints its name on stdout,
on a separate line. Look for this in stdout. Only if we've seen it do
we focus/report the notification.
This patch modifies our stdout reader to consume input as we go,
instead of all at once when stdout is closed. This will make it easier
to add support for reading e.g. the daemon assigned notification ID in
the future, and also ensures we see the XDG activation token "as soon
as possible".
Furthermore, to be more future proof, require the XDG activation token
to be prefixed with 'xdgtoken=', and ignore other lines.
Thus, instead of treating *all* of stdout as the XDG activation token,
parse stdout line-by-line, and ignore everything that does not begin
with 'xdgtoken='. Everything (on that line) following 'xdgtoken=' is
treated as the activation token.
This patch adds support for window focusing, and sending events back
to the client application when a notification is closed.
* Refactor notification related configuration options:
- add desktop-notifications sub-section
- deprecate 'notify' in favor of 'desktop-notifications.command'
- deprecate 'notify-focus-inhibit' in favor of
'desktop-notifications.inhibit-when-focused'
* Refactor: rename 'struct kitty_notification' to 'struct
notification'
* Pass a 'struct notification' to notify_notify(), instead of many
arguments.
* notify_notify() now registers a reaper callback. When the notifier
process has terminated, the notification is considered closed, and we
either try to focus (activate) the window, or send an event to the
client application, depending on the notification setting.
* For the window activation, we need an XDG activation token. For now,
assume *everything* written on stdout is part of the token.
* Refactor: remove much of the warnings from OSC-99; we don't
typically log anything when an OSC/CSI has invalid values.
* Add icon support to OSC-99. This isn't part of the upstream
spec. Foot's implementation:
- uses the 'I' parameter
- the value is expected to be a symbolic icon name
- a quick check for absolute paths is done, and such icon requests
are ignored.
* Added ${icon} to the 'desktop-notifications.command' template. Uses
the icon specified in the notification, or ${app-id} if not set.
This adds limited support for OSC-99, kitty desktop notifications[^1]. We
support everything defined by the "protocol", except:
* 'a': action to perform on notification activation. Since we don't
trigger the notification ourselves (over D-Bus), we don't know a)
which ID the notification got, or b) when it is clicked.
* ... and that's it. Everything else is supported
To be explicit, we *do* support:
* Chunked notifications (d=0|1), allowing the application to append
data to a notification in chunks, before it's finally displayed.
* Plain UTF-8, or base64-encoded UTF-8 payload (e=0|1).
* Notification identifier (i=xyz).
* Payload type (p=title|body).
* When to honor the notification (o=always|unfocused|invisible), with
the following quirks:
- we don't know when the window is invisible, thus it's treated as
'unfocused'.
- the foot option 'notify-focus-inhibit' overrides 'always'
* Urgency (u=0|1|2)
[^1]: https://sw.kovidgoyal.net/kitty/desktop-notifications/
This implements
https://gist.github.com/rockorager/e695fb2924d36b2bcf1fff4a3704bd83,
in-band window resize notifications.
When user enables private mode 2048 (in-band resize
notifications), *always* send current size, even if the mode is
already active.
This ensures applications can rely on getting a reply from the
terminal.
BTN_BACK and BTN_FORWARD are separate buttons. The scroll wheel don't
have any button mappings in libinput/wayland, so make up our own
defines.
This allows us to map them in mouse bindings.
Also expose BTN_WHEEL_{LEFT,RIGHT}. These were already defined, and
used, internally, to handle wheel tilt events. With this, they can
also be used in mouse bindings.
Finally, fix encoding used for BTN_{BACK,FORWARD} when sending mouse
button events to the client application. Before this, they were mapped
to buttons 4/5. But, button 4/5 are for the scroll wheel, and as
mentioned above, BTN_{BACK,FORWARD} are not the same as scroll wheel
"buttons".
Closes#1763
This option controls how we render the cursor when the terminal window
is unfocused.
Possible values are:
* hollow: the default, and how we rendered the cursor before this
patch.
* unchanged: render the cursor exactly the same way as when the window
is focused.
* none: do not render any cursor at all
Closes#1582
Virtual machine monitor programs (e.g. QEMU, Cloud Hypervisor) expose
guest consoles as PTYs. With this patch, foot can access these guest
consoles.
Usually, the program used for accessing these PTYs is screen, but
screen is barely developed, doesn't support resizing, and has a bunch
of other unrelated stuff going on. It would be nice to have a
terminal emulator that properly supported opening an existing PTY.
The VMM controls the master end of the PTY, so to the other end (in
this case foot), it just behaves like any application running in a
directly-opened PTY, and all that's needed is to change foot's code to
support opening an existing PTY rather than creating one.
Co-authored-by: tanto <tanto@ccc.ac>
This adds support for a new OSC escape sequence: OSC 176, that lets
terminal programs tell the terminal the name of the app that is
running. foot then sets the app ID of the toplevel to that ID,
which lets the compositor know which app is running, and typically
sets the appropriate icon, window grouping, ...
See: https://gist.github.com/delthas/d451e2cc1573bb2364839849c7117239
When launching footclient with -E,--client-environment the environment
variables that should be set by foot, wasn't.
Those variables are:
* TERM
* COLORTERM
* PWD
* SHELL
and all variables defined by the user in the [environment] section in
foot.ini.
In the same way, we did not *unset* TERM_PROGRAM and
TERM_PROGRAM_VERSION.
This patch fixes it by "cloning" the custom environment, making it
mutable, and then adding/removing the variables above from it.
Instead of calling setenv()/unsetenv() directly, we add the wrapper
functions add_to_env() and del_from_env().
When *not* using a custom environment, they simply call
setenv()/unsetenv().
When we *are* using a custom environment, add_to_env() first loops all
existing variables, looking for a match. If a match is found, it's
updated with the new value. If it's not found, a new entry is added.
del_from_env() loops all entries, and removes it when a match is
found. If no match is found, nothing is done.
The mutable environment is allocated on the heap, but never free:d. We
don't need to free it, since it's only allocated after forking, in the
child process.
Closes#1568
This implements private mode 2027 - grapheme cluster processing, as
defined in the "Terminal Unicode Core"[1] specification.
Internally, we just flip the already existing option "grapheme
shaping". Since it's now runtime changeable, we need a copy of it in
the terminal struct, rather than referencing the conf object.
[1]: 13fc5a8993/spec/terminal-unicode-core.tex (L50-L53)
This patch changes the default of triple clicking, from selecting the
current logical row, to first trying to select the contents of the
quote under the cursor, and if failing to find a quote, selecting the
current row (like before).
This is implemented by adding a new key binding, 'select-quote'.
It will search for surrounding quote characters, and if one is found
on each side of the cursor, the quote is selected. If not, the entire
row is selected instead.
Subsequent selection operations will behave as if the selection is
either a word selection (a quote was found), or a row selection (no
quote found).
Escaped quote characters are not supported: "foo \" bar" will match
'foo \', and not 'foo " bar'.
Mismatched quotes are not custom handled. They will simply not match.
Nested quotes ("123 'abc def' 456") are supported.
Closes#1364
Un-grabbed wheel events are now passed through the mouse binding
matching logic, instead of being hardcoded to scrolling the terminal
contents.
They are mappable through the BTN_BACK and BTN_FORWARD buttons.
Since they're not actually button *presses*, they never generate a
click count other than 1. This limitation is documented, but not
checked in the config. This means it's possible to create bindings
like "BTN_BACK+3" (i.e. triple "click"). They will however never
trigger.
The old, hardcoded logic is now accessible through the new
scrollback-up-mouse and scrollback-down-mouse mouse
bindings. They (obiously) default to BTN_BACK and BTN_FORWARD,
respectively.
Example usage: keep the default of scrolling terminal contents with
the wheel, when used without modifiers, but map Control+wheel to font
zoom in/out:
[mouse-bindings]
font-increase=Control+BTN_FORWARD
font-decrease=Control+BTN_BACK
(this also keeps the default key bindings to zoom in/out; ctrl-+ and
ctrl+-)
Closes#1077
By how much to increase the luminance when brightening bold
fonts. This was previously hard-coded to a factor of 1.3, which is now
the default value of the new config option.
Closes#1434
Even if WAYLAND_DISPLAY / XDG_RUNTIME_DIR are defined, if we can't
find the corresponding socket, we fallback to the path used when they
are not defined.
