This patch adds a new configuration option,
‘osc8-underline=url-mode|always’.
When set to ‘url-mode’, OSC-8 URLs are only
highlighted (i.e. underlined) in url-mode, just like auto-detected
URLs.
When set to ‘always’, they are always underlined, regardless of mode,
and regardless of their other attributes.
This is implemented by tagging collected URLs with a boolean,
instructing urls_render() and urls_reset() whether they should update
the cells’ ‘url’ attribute or not.
The OSC-8 collecter sets this based on the value of ‘osc8-underline’.
Finally, when closing an OSC-8 URL, the cells are immediately tagged
with the ‘url’ attribute if ‘osc8-underline’ is set to ‘always’.
Up until now, the various key binding modes (“normal”, “search” and
“url”) have used their own struct definitions for their key bindings.
The only reason for this was to have a properly typed “action” (using
the appropriate “action” enum).
This caused lots of duplicated code. This patch refactors this to use
a single struct definition for the “unparsed” key bindings handled by
the configuration, and another single definition for “parsed” bindings
used while handling input.
This allows us to implement configuration parsing, keymap translation
and so on using one set of functions, regardless of key binding mode.
* colors.jump_labels configures the foreground and background colors
used when rendering URL jump labels. Defaults to “regular0
regular3” (i.e. black on yellow).
* colors.urls configures the color to use when highlighting URLs in
URL mode. Note that we aren’t currently doing any
highlighting... Defaults to regular3 (i.e. yellow).
Instead of disabling content centering, delay the TIOCSWINSZ (a.k.a
delay sending the new dimensions to the client) by a small amount
while doing an interactive resize.
Non-interactive resizes are still immediate.
For now, force a resize when the user stops the interactive
resize. This ensures the client application receives the new
dimensions immediately.
It still works without the last, forced, resize, but there typically
be a small delay until the client application receives the final
dimensions.
Closes#301Closes#283
When ‘selection-target’ is set to ‘none’, selecting text does not copy
the text to _any_ clipboard.
This patch also refactors the value parsing to be data driven.
If the value is specified without a unit, then the value is assumed to
be in points, subject to DPI scaling.
The value can optionally have a ‘px’ suffix, in which case the value
is treated as a raw pixel count.
When set, the grid contents is centered in the window. I.e. the
left/right and top/bottom margins are equal (+- 1px).
This causes the content to “jump” while doing an interactive resize,
but may still be preferred in e.g. a tiling WM.
Closes#273
This extends the new ‘dpi-aware’ option with a new default value,
‘auto’.
When set to ‘auto’, fonts are sized using monitors’ DPI when output
scaling is disabled. When output scaling is enabled, fonts are instead
sized using the scaling factor.
The reasoning here is that a user that has enabled output scaling is
obviously *not* relying on DPI scaling.
Output scaling can also be a way to compensate for different viewing
distances, in which case we do *not* want to break that by using DPI
scaling.
Users can still force DPI-only font sizing by setting ‘dpi-aware=yes’,
or disable it completely by setting ‘dpi-aware=no’.
OSC 777 is URxvt’s generic escape to send commands to its perl
extensions. The first parameter is the name of the extension, followed
by its arguments.
OSC 777;notify is a, if not well established, at least a fairly well
known escape sequence to request a (desktop) notification. The syntax
is:
\e]777;notify;<title>;<body>\e\\
Neither title nor body is escaped in any way, meaning they should not
contain a ‘;’.
Foot will split title from body at the *first* ‘;’. Any remaining ‘;’
characters are treated as part of ‘body’.
Instead of adding built-in support for the freedesktop notification
specification (which would require us to link against at least dbus),
add a new config option to foot.ini: ‘notify’.
This option specifies the command to execute when a notification is
received. ‘${title}’ and ‘${body}’ can be used anywhere, in any
combination, and as many times as you want, in any of the command
arguments.
The default value is ‘notify-send -a foot -i foot ${title} ${body}’
When disabled, foot no longers uses outputs’ DPI to scale the
font. Instead, it uses the outputs’ scaling factor.
That is, instead of appending “:dpi=123” to the fontconfig string,
modify the “:pixelsize” or “:size” attribute.
Closes#206
These options lets the user configure custom fonts and styles, to use
with the bold and italic cell attributes.
By default, they are unset, meaning we use the bold/italic variants of
the regular font.
Closes#169.
When csd.preferred == none, we will request CSDs from the compositor,
but internally render as if we are using SSDs. That is, we don’t
render any window decorations at all.
Note that some compositors may ignore our request to use CSDs, and
still render SSDs for us.
Closes#163
This option lets the user configure which characters act as word
delimiters when selecting text.
This affects both “double clicking”, and ‘ctrl-w’ in scrollback search
mode.
Closes#156
Add anew config option, ‘bell=none|set-urgency’. When set to
‘set-urgency’, the margins will be painted in red (if the window did
not have keyboard focus).
This is intended as a cheap replacement for the ‘urgency’ hint, that
doesn’t (yet) exist on Wayland.
Closes#157
Use the new fcft_set_scaling_filter() API to use a non-default scaling
filter.
By default, we use lanczo3, the ‘best’ filter. This overrides the
default in fcft, which is ‘cubic’ filtering.
When enabled, foot will ‘damage’ the entire window, instead of just
the modified/updated rows.
This will force the compositor to redraw/blend the whole window.
This can be used to workaround an issue with fractional scaling in
Gnome, where random thin lines may appear.
Try to detect double-width *glyphs* for single-width *characters*, and
allow them to overflow into the next cell.
This is only done for single-width chars with a glyph width that is at
least 1.5 cells wide, but at most 3 cells.
The feature is gated by the new
‘tweak.allow-overflowing-double-width-glyphs’, and is disabled by
default.
Closes#116
This simplifies the handling of mouse and keyboard bindings.
Before, the bindings where parsed *both* when loading the
configuration, and then on every keyboard enter event. This was done
since keys require a keymap to be decoded. Something we don't have at
configuration time. The idea was that at config time, we used a
default keymap just to verify the key combo strings were valid.
The following has changed:
* The bindings in the config struct is now *one* key combo per
entry. Previously, it was one *action* per entry, and each entry
had one or more key combos.
Doing it this way makes it easier when converting the binding in the
keyboard enter event (which previously had to expand the combos
anyway).
* The bindings in the config struct no longer contains any unparsed
strings.
A key binding contains a decoded 'modifier' struct (which specifies
whether e.g. ctrl, or shift, or ctrl+shift must be pressed for the
binding to be used).
It also contains a decoded XKB keysym.
* A mouse binding in the config struct is similar to a key binding,
except it contains the button, and click count instead of the XKB
key sym.
* The modifiers in the user-specified key combo is decoded at config
time, by using the pre-defined XKB constants
XKB_MOD_NAME_<modifier>.
The result is stored in a 'modifiers' struct, which is just a
collection of booleans; one for each supported modifier.
The supported modifiers are: shift, ctrl, alt and meta/super.
* The key sym is decoded at config time using
xkb_keysym_from_name(). This call does *not* depend on a keymap.
* The mouse button is decoded at config time using a hardcoded mapping
table (just like before).
* The click count is currently hard-coded to 1.
* In the keyboard enter event, all we need to do is pre-compute the
xkb_mod_mask_t variable for each key/mouse binding, and find all the
*key codes* that map to the (already decoded) symbol.
For mouse bindings, the modifiers are the *only* reason we convert
the mouse bindings at all.
In fact, on button events, we check if the seat has a keyboard. If
not, we use the mouse bindings from the configuration directly, and
simply filter out those with a non-empty set of modifiers.
This can be set to 'none' (the default), 'osd', 'log' or 'both'.
When 'osd' is enabled, we'll render the frame rendering time to a
sub-surface after each frame.
When 'log' is enabled, the frame rendering time is logged on stderr.
The default is still to inverse the regular foreground/background
colors.
If the user sets *both* of the new options, selection-foreground and
selection-background, those colors will *always* be used for selected
cells, instead of inverting the regular foreground/background colors.
When enabled, the mouse cursor is hidden when the user types in the
terminal. It is un-hidden when the user moves the mouse, or when the
window loses keyboard focus.
* Rename user_warning to user_notification
* Add warning and error types (in addition to the existing deprecated)
* Simplify logic when emitting a user notification after forking; we
don't need to copy the notification data since we're in a new
process and have total control over that memory.
This allows us to detect syntax errors early on, and is also more
efficient since we don't have to re-tokenize the command line every
time the binding is executed.
