When the compositor sends a new keymap, don't reset the XKB compose
state.
This is done by initializing the XKB context, along with the compose
state, when binding the seat, instead of in keymap().
Then, in keymap(), simply stop destroying the old xkb state. Only
destroy, and re-create the keymap state.
Closes#1744
This implements high resolution mouse wheel scroll events. A "normal"
scroll step corresponds to the value 120. Anything less than that is a
partial scroll step.
This event replaces axis_discrete(), when we bind wl_seat v8 (which we
now do, when available).
We calculate the number of degrees that is required to scroll a single
line, based off of the scrollback.multiplier value.
Each high-res event accumulates, until we have at least the number of
degress required to scroll one, or more lines.
The remaining degrees are kept, and added to in the next scroll event.
Closes#1738
This fixes an issue where entering unicode-mode in one foot client,
also enabled unicode-mode on other foot clients. Both
visually (although glitchy), and in effect.
The reason the state was originally in the seat objects, was to fully
support multi-seat. That is, one seat/keyboard entering unicode-mode
should not affect other seats/keyboards.
The issue with this is that seat objects are Wayland global. Thus, in
server mode, all seat objects are shared between the foot clients.
There is a similarity with IME, which also keeps state in the
seat. There's one big difference, however, and that is IME has Wayland
native enter/leave events, that the compositor emits when windows are
focused/unfocused. These events allow us to reset IME state. For our
own Unicode mode, there is nothing similar.
This patch moves the Unicode state from seats, to the terminal
struct. This does mean that if one seat/keyboard enters Unicode mode,
then *all* seats/keyboards will affect the unicode state. This
potential downside is outweighed by the fact that different foot
clients no longer affect each other.
Closes#1717
The kitty keyboard specification has been updated/clarified yet
again. Locked modifiers are to be ignored if the key event would
result in plain text without the locked modifier being enabled.
In short, locked modifiers are included in the set of modifiers
reported in a key event. But having a locked modifier enabled doesn't
turn all key events into CSIu sequences.
For example, with only the disambiguate mode enabled, pressing 'a', or
'shift+a' results in a/A regardless of the state of Caps- or NumLock.
But 'ctrl+a', which always results in a CSIu, will have a different
modifier list, depending on whether Caps- or NumLock are enabled.
This fixes an issue where some key combinations resulted in different
output (e.g. escape code vs. plain text) depending on the state of
e.g. the NumLock key. One such example is Shift+space. Another example
is Shift+BackSpace.
This patch also removes the hardcoded CapsLock filter, when
determining whether a key combo produces text or not, and instead uses
the locked modifiers as reported by XKB.
When kitty keyboard is enabled, pressing a modifier key will clear the
text selection. This makes it difficult to copy text because the
selection clears as soon as the user presses "ctrl".
Tested-by: Robin Jarry <robin@jarry.cc>
Signed-off-by: Tim Culverhouse <tim@timculverhouse.com>
For the purpose of matching key bindings, "significant" modifiers are
no more.
We're really only interested in filtering out "locked"
modifiers. We're already doing this, so there's no need to *also*
match against a set of "significant" modifiers.
Furthermore, we *never* want to consider locked keys (e.g. when
emitting escapes to the client application), thus we can filter those
out already when retrieving the set of active modifiers.
The exception is the kitty keyboard protocol, which has support for
CapsLock and NumLock. Since we're already re-retrieving the "consumed"
modifiers (using the GTK style, rather than normal "XKB" style, to
better match the kitty terminal), we might as well re-retrieve the
effective modifiers as well.
That is, allow custom modifiers (i.e. other than ctrl/shift/alt etc)
in key bindings.
This is done by no longer validating/translating modifier names to
booleans for a pre-configured set of modifiers (ctrl, shift, alt,
super).
Instead, we keep the modifier *names* in a list, in the key binding
struct.
When a keymap is loaded, and we "convert" the key binding, _then_ we
do modifier translation. For invalid modifier names, we print an
error, and then ignore it. I.e. we no longer fail to load a config due
to invalid modifier names.
We also need to update how we determine the set of significant
modifiers. Any modifier not in this list will be ignored when matching
key bindings.
Before this patch, we hardcoded this to shift/alt/ctrl/super. Now, to
handle custom modifiers as well, we simply treat *all* modifiers
defined by the current layout as significant.
Typically, the only unwanted modifiers are "locked" modifiers. We are
already filtering these out.
Starting with kitty 0.32.0, the modifier bits during modifier key
events behave differently, compared to before. Or, rather, they have
now been spec:ed; before, behavior was different on e.g. MacOS, and
Linux.
The new behavior is this:
On key press, the modifier bits in the kitty key event *includes* the
pressed modifier key.
On key release, the modifier bits in the kitty key event does *not*
include the released modifier key.
In other words, The modifier bits reflects the state *after* the key
event.
This is the exact opposite of what foot did before this patch.
The patch is really pretty small: in order to include the key in the
modifier set, we simulate a key press to update the XKB state, using
xkb_state_uppate_key(). For key pressed, we simulate an XKB_KEY_DOWN
event, and for key releases we simulate an XKB_KEY_UP event.
Then we re-retrieve the modifers, both the full set, and the consumed
set.
Closes#1561
This patch changes the default of triple clicking, from selecting the
current logical row, to first trying to select the contents of the
quote under the cursor, and if failing to find a quote, selecting the
current row (like before).
This is implemented by adding a new key binding, 'select-quote'.
It will search for surrounding quote characters, and if one is found
on each side of the cursor, the quote is selected. If not, the entire
row is selected instead.
Subsequent selection operations will behave as if the selection is
either a word selection (a quote was found), or a row selection (no
quote found).
Escaped quote characters are not supported: "foo \" bar" will match
'foo \', and not 'foo " bar'.
Mismatched quotes are not custom handled. They will simply not match.
Nested quotes ("123 'abc def' 456") are supported.
Closes#1364
Un-grabbed wheel events are now passed through the mouse binding
matching logic, instead of being hardcoded to scrolling the terminal
contents.
They are mappable through the BTN_BACK and BTN_FORWARD buttons.
Since they're not actually button *presses*, they never generate a
click count other than 1. This limitation is documented, but not
checked in the config. This means it's possible to create bindings
like "BTN_BACK+3" (i.e. triple "click"). They will however never
trigger.
The old, hardcoded logic is now accessible through the new
scrollback-up-mouse and scrollback-down-mouse mouse
bindings. They (obiously) default to BTN_BACK and BTN_FORWARD,
respectively.
Example usage: keep the default of scrolling terminal contents with
the wheel, when used without modifiers, but map Control+wheel to font
zoom in/out:
[mouse-bindings]
font-increase=Control+BTN_FORWARD
font-decrease=Control+BTN_BACK
(this also keeps the default key bindings to zoom in/out; ctrl-+ and
ctrl+-)
Closes#1077
No longer inhibits touch event handling when terminal window
has pointer focus. Instead, inhibit touch event when at least
one pointer button is held down.
This change improves user experience when using foot with both
a mouse and a touchscreen.
Closes#1428.
When enabled, double-clicking the CSD titlebar will (un)maximize the
window.
Defaults to ‘yes’ (since this is the old hard-coded behavior).
Closes#1293
When this happened (for example, by specifying a custom compose
sequence), the kitty keyboard protocol didn’t emit any text at all.
This was caused by the utf32 codepoint being -1. This in turned was
caused by us trying to convert the utf8 sequence to a *single* utf32
codepoint.
This patch replaces the use of mbrtoc32() with a call to
ambstoc32(), and the utf32 codepoint with an utf32 string.
The kitty keyboard protocol is updated:
* When determining if we’re dealing with text, check *all* codepoints
in the utf32 string.
* Add support for multiple codepoints when reporting "associated
text". The first codepoint is the actual parameter in the emitted
sequence, and the remaining codepoints are sub-parameters. I.e. the
codepoints are colon separated.
Closes#1288
Key-binding sets are bound to a seat/configuration pair. The conf
reference is done when a new terminal instance is created.
When that same terminal instance is destroyed, the key binding set is
unref:ed.
If the terminal instance is destroyed *before* the key binding set has
been referenced, we’ll still unref it. This creates an imbalance.
In particular, when the there is exactly one other terminal instance
referencing that same key binding set, that terminal instance will
trigger a foot server crash as soon as it receives a key press/release
event. This happens because the next-to-last terminal instance brought
the reference count of the binding set down to 0, causing it to be
free:d.
Thus, we *must* reference the binding set *before* we can error
out (when instantiating a new terminal instance).
At this point, we don’t yet have a valid terminal instance. But,
that’s ok, because all the key_binding_new_for_term() did with the
terminal instance was get the "struct wayland" and "struct config"
pointers. So, rename the function and simply pass these pointers
explicitly.
Similarly, change key_binding_for() to take a "struct config" pointer,
rather than a "struct terminal" pointer.
Also rename key_binding_unref_term() -> key_binding_unref().
In some cases, the compositor sends a pointer enter event with a NULL
surface. It’s unclear if this is a compositor bug, or a race (where
the compositor sends an enter event on a CSD surface at the same time
foot unmaps the CSDs). Regardless, this causes seat->mouse_focus to be
unset, which triggers a crash in foot on the next pointer motion
event.
This patch does two things:
a) log a warning when we receive a pointer event with a NULL surface
b) ignore motion events where seat->mouse_focus is NULL
This mode is activated through the new key-bindings.unicode-input and
search-bindings.unicode-input key bindings.
When active, the user can “build” a Unicode codepoint by typing its
hexadecimal value.
Note that there’s no visual feedback in this mode. This is
intentional. This mode is intended to be a fallback for users that
don’t use an IME.
Closes#1116
Certain dead key combinations results different escape sequences in
foot, compared to kitty, when the kitty keyboard protocol is used.
if (composed && is_text)
key = utf32;
else {
key = xkb_keysym_to_utf32(sym_to_use);
if (key == 0)
return false;
/* The *shifted* key. May be the same as the unshifted
* key - if so, this is filtered out below, when
* emitting the CSI */
alternate = xkb_keysym_to_utf32(sym);
}
If is_text=false, we’ll fall through to the non-composed
logic. is_text is set to true if the character is printable *and*
there aren’t any non-consumed modifiers enabled.
shift+space is one example where shift is *not* consumed (typically -
may be layouts where it is).
As a result, pressing ", followed by shift+space with the
international english keyboard layout (where " is a dead key) results
in different sequences in foot and kitty.
This patch fixes this by always treating composed characters as
printable.
Closes#1120
The compositor _usually_ sends the keymap event *before* the enter
event. But not always.
Not (yet) having a keymap is not a reason to ignore the enter
event (now, on the other hand, getting a key press/release event
without a keymap is a compositor bug).
Closes#1097
This patch adds support for the OSC-133;A sequence, introduced by
FinalTerm and implemented by iTerm2, Kitty and more. See
https://iterm2.com/documentation-one-page.html#documentation-escape-codes.html.
The shell emits the OSC just before printing the prompt. This lets the
terminal know where, in the scrollback, there are prompts.
We implement this using a simple boolean in the row struct ("this row
has a prompt"). The prompt marker must be reflowed along with the text
on window resizes.
In an ideal world, erasing, or overwriting the cell where the OSC was
emitted, would remove the prompt mark. Since we don't store this
information in the cell struct, we can't do that. The best we can do
is reset it in erase_line(). This works well enough in the "normal"
screen, when used with a "normal" shell. It doesn't really work in
fullscreen apps, on the alt screen. But that doesn't matter since we
don't support jumping between prompts on the alt screen anyway.
To be able to jump between prompts, two new key bindings have been
added: prompt-prev and prompt-next, bound to ctrl+shift+z and
ctrl+shift+x respectively.
prompt-prev will jump to the previous, not currently visible, prompt,
by moving the viewport, ensuring the prompt is at the top of the
screen.
prompt-next jumps to the next prompt, visible or not. Again, by moving
the viewport to ensure the prompt is at the top of the screen. If
we're at the bottom of the scrollback, the viewport is instead moved
as far down as possible.
Closes#30
First, add a ‘token’ argument to spawn(). When non-NULL, spawn() will
set the ‘XDG_ACTIVATION_TOKEN’ environment variable in the forked
process. If DISPLAY is non-NULL, we also set DESKTOP_STARTUP_ID, for
compatibility with X11 applications. Note that failing to set either
of these environment variables are considered non-fatal - i.e. we
ignore failures.
Next, add a helper function, wayl_get_activation_token(), to generate
an XDG activation token, and call a user-provided callback when it’s
‘done (since token generation is asynchronous). This function takes an
optional ‘seat’ and ‘serial’ arguments - when both are non-NULL/zero,
we set the serial on the token. ‘win’ is a required argument, used to
set the surface on the token.
Re-write wayl_win_set_urgent() to use the new helper function.
Finally, rewrite activate_url() to first try to get an activation
token (and spawn the URL launcher in the token callback). If that
fails, or if we don’t have XDG activation support, spawn the URL
launcher immediately (like before this patch).
Closes#1058
When determining whether a keysym is a modifier (to skip hiding the
pointer when [mouse].hide-when-typing=yes), use the same matching
logic xkbcommon does.
This function, xkb_keysym_is_modifier() is unfortunately not part of
the public API, which is why we copy it instead.
The global config doesn’t necessarily reflect the correct
configuration to use - we should *always* use the current terminal
instance’s conf pointer.
* Move selection override modifier mask to the key_binding_set struct
* Always warn if XDG activation is unavailable, not just if
bell.urgent is set (we no longer have access to this information)
* Pass ‘bool presentation_timings’ as a parameter to wayl_init()
* Remove ‘presentation_timings’ member from the ‘terminal’ struct
Closes#932
Up until now, our Wayland seats have been tracking key bindings. This
makes sense, since the seat’s keymap determines how the key bindings
are resolved.
However, tying bindings to the seat/keymap alone isn’t enough, since
we also depend on the current configuration (i.e. user settings) when
resolving a key binding.
This means configurations that doesn’t match the wayland object’s
configuration, currently don’t resolve key bindings correctly. This
applies to footclients where the user has overridden key bindings on
the command line (e.g. --override key-bindings.foo=bar).
Thus, to correctly resolve key bindings, each set of key bindings must
be tied *both* to a seat/keymap, *and* a configuration.
This patch introduces a key-binding manager, with an API to
add/remove/lookup, and load/unload keymaps from sets of key bindings.
In the API, sets are tied to a seat and terminal instance, since this
makes the most sense (we need to instantiate, or incref a set whenever
a new terminal instance is created). Internally, the set is tied to a
seat and the terminal’s configuration.
Sets are *added* when a new seat is added, and when a new terminal
instance is created. Since there can only be one instance of each
seat, sets are always removed when a seat is removed.
Terminals on the other hand can re-use the same configuration (and
typically do). Thus, sets ref-count the configuration. In other words,
when instantiating a new terminal, we may not have to instantiate a
new set of key bindings, but can often be incref:ed instead.
Whenever the keymap changes on a seat, all key bindings sets
associated with that seat reloads (re-resolves) their key bindings.
Closes#931
We have a number of sub-surfaces for which we are *not* interrested in
pointer (or touch) input.
Up until now, we’ve manually dealt with these, by recognizing these
surfaces in all pointer events, and ignoring them.
But, lo and behold, there are better ways of doing this. By clearing
the subsurface’s input region, the compositor will do this for us -
when a pointer is outside a surface’s input region, the event is
passed to the next surface underneath it.
This is exactly what we want! Do this for all subsurfaces, *except*
the CSDs.
Before this, foot always emitted a CSI if _any_ modifier was
active. XTerm doesn’t behave quite like this. Instead, it appears to
special-case shift somewhat:
If the generated symbol (e.g ‘A’) is the upper case version of the
pressed key’s base symbol (‘a’), and is in the range a-z, emit a CSI.
If not emit a plain symbol:
Examples (Swedish layout):
* shift-a (generated symbol is ‘A’) emits a CSI
* shift-, (generated symbol is ‘;’) emits ‘;’
* shift-alt-, (generated symbol is ‘;’) emits a CSI
Closes#1009
When matching “untranslated” bindings (by matching the base symbol of
the key, e.g. ctrl+shift+2 in US layout), require that no
non-significant modifiers are active.
This fixes an issue where AltGr was “ignored”, and would cause certain
combinations to match a key binding.
Example: ctrl+altgr+0, on many European layouts matched against the
default ctrl+0 (reset the font size), instead of emitting ^]
To make this work, we now need to filter out “locked”
modifiers (e.g. NumLock and CapsLock). Otherwise having e.g. NumLock
active would prevent *all* untranslated matching to fail.
Closes#983
With this, it is now possible to map key combos to custom escapes. The
new bindings are defined in a new section, “text-bindings”, on the
form “string=key combo”.
The string can consist of printable characters, or \xNN style hex
digits:
[text-bindings]
abcd = Control+a
\x1b[A = Control+b Control+c Control+d # map ctrl+b/c/d to UP
