This patch adds the following new search key bindings:
* extend-char (shift+right)
* extend-line-down (shift+down)
* extend-backward-char (shift+left)
* extend-backward-to-word-boundary (ctrl+shift+left)
* extend-backward-to-next-whitespace (ctrl+shift+alt+left)
* extend-line-up (shift+up)
They can be used to extend the search match (i.e. the selection).
This patch also adds an initial set of key bindings to scroll in the
scrollback history:
* scrollback-up-page
* scrollback-down-page
These work just like the key bindings for the normal mode. Also note
that it was already possible to scroll using the mouse.
This patch also fixes a couple of search mode bugs:
* crashing when a search match ends in the last column
* grapheme clusters not being matched correctly
* Search match not being "extendable" after a pointer leave event
* A few others, related to either large matches, or extending matches
after moving the viewport.
There are still a couple of (known) issues:
* A search match isn't correctly highlighted if its *starting* point
is outside the viewport.
* Extending the match to end of the scrollback (i.e. the most recent
output) is simply buggy.
Related to #419
Previously, foot -a test wouldn't actually set the app ID if there was
no config file and the defaults were used, which was very
counterintuitive.
Now, load_config() will carry on until the end, even if there's no
config file, so overrides still work.
This patch changes the default of triple clicking, from selecting the
current logical row, to first trying to select the contents of the
quote under the cursor, and if failing to find a quote, selecting the
current row (like before).
This is implemented by adding a new key binding, 'select-quote'.
It will search for surrounding quote characters, and if one is found
on each side of the cursor, the quote is selected. If not, the entire
row is selected instead.
Subsequent selection operations will behave as if the selection is
either a word selection (a quote was found), or a row selection (no
quote found).
Escaped quote characters are not supported: "foo \" bar" will match
'foo \', and not 'foo " bar'.
Mismatched quotes are not custom handled. They will simply not match.
Nested quotes ("123 'abc def' 456") are supported.
Closes#1364
Un-grabbed wheel events are now passed through the mouse binding
matching logic, instead of being hardcoded to scrolling the terminal
contents.
They are mappable through the BTN_BACK and BTN_FORWARD buttons.
Since they're not actually button *presses*, they never generate a
click count other than 1. This limitation is documented, but not
checked in the config. This means it's possible to create bindings
like "BTN_BACK+3" (i.e. triple "click"). They will however never
trigger.
The old, hardcoded logic is now accessible through the new
scrollback-up-mouse and scrollback-down-mouse mouse
bindings. They (obiously) default to BTN_BACK and BTN_FORWARD,
respectively.
Example usage: keep the default of scrolling terminal contents with
the wheel, when used without modifiers, but map Control+wheel to font
zoom in/out:
[mouse-bindings]
font-increase=Control+BTN_FORWARD
font-decrease=Control+BTN_BACK
(this also keeps the default key bindings to zoom in/out; ctrl-+ and
ctrl+-)
Closes#1077
By how much to increase the luminance when brightening bold
fonts. This was previously hard-coded to a factor of 1.3, which is now
the default value of the new config option.
Closes#1434
When enabled, double-clicking the CSD titlebar will (un)maximize the
window.
Defaults to ‘yes’ (since this is the old hard-coded behavior).
Closes#1293
Having a keybinding to invoke arbitrary unicode characters is very
useful. It's often used as a method of last resort to communicate with
people outside of your main language. For example, if you want to type
the last letter of my real name, you can invoke the latin-1 character
0xe9 or unicode 0x00e9.
You can also use this to type special characters, for example, unicode
U+1F4A9 is of course, the infamous PILE OF POO, which is sure to
produce million laughs everywhere you go.
In foot, there's no keybinding by default to invoke the very useful
unicode-input command. There is no "standard" (as in "ISO") keybinding
this either. But there *is* a de-facto standard currently deployed
by *both* GTK and Qt (a rare feat) *and* Chrome OS (an even rarer
feat) and it's control-shift-u.
Alternatives include Control-x 8 (emacs), Control V u (vim),
Alt (Windows, LibreOffice), or Option (Mac). I doubt we want to adopt
any of those.
So let's use control-shift-u for this. Unfortunately, it's currently
assigned to show-urls-launch, which is unfortunate, but
insurmountable. We can reassign this keybinding elsewhere. I have
picked control-shift-o in my configuration, because "o" is a good
mnemonic for "open URLs". Others have suggested "m" instead.
Closes: #1183
We now default to scaling fonts using the scaling factor, not monitor
DPI.
The ‘auto’ value for dpi-aware has been removed.
Documentation (man pages and README) have been updated to reflect the
new default.
For this to work, the default app-id of footclient has been changed
from ‘foot’ to ‘footclient’.
By using distinct StartupWMClasses, the compositor can connect a
running foot/footclient instance to the correct .desktop-file. This
ensures the correct icon is being used in e.g. docks, and that actions
like “open another window” works correctly.
Note that the user can override the app-id, either by setting app-id
in foot.ini, or with the -a,--app-id command line option.
Closes#1355
This patch generalizes the utmp support, to not only support
libutempter, but also ulog (and in the future, even more interfaces).
* Rename config option main.utempter to main.utmp-helper
* Add meson option -Dutmp-backend=none|libutempter|ulog|auto
* Rename meson option -Ddefault-utempter-path to -Dutmp-default-helper-path
* utmp is no longer detected at compile time, but at runtime instead.
Meson will configure the following pre-processor macros, based on the
selected utmp backend:
* UTMP_ADD - argument to pass to utmp helper when adding a record (starting foot)
* UTMP_DEL - argument to pass to utmp helper when removing a record (exiting foot)
* UTMP_DEL_HAVE_ARGUMENT - if defined, UTMP_DEL expects an extra argument ($WAYLAND_DISPLAY)
* UTMP_DEFAULT_HELPER_PATH - path to the default utmp helper binary
The documentation has been updated to mention which arguments are
passed to the helper binary.
Closes#1314
If the user didn’t explicitly set the font size (e.g. font=monospace,
instead of font=monospace:size=12), our initial attempt to read the
FC_SIZE and FC_PIXEL_SIZE attributes will fail, and we used to
fallback to setting the size to 8pt.
Change this slightly, so that when we fail to read the FC_*_SIZE
attributes, apply the fontconfig rules, but *without expanding*
them (i.e. without calling FcDefaultSubstitute()).
Then try reading FC_*_SIZE again.
If that too fails, _then_ set size to 8pt. This allows us to pick up
rules that set a default {pixel}size:
<fontconfig>
<match>
<edit name="pixelsize" mode="append"><double>14</double></edit>
</fontconfig>
Closes#1287
Key bindings with multiple key mappings share auxiliary data (e.g. the
command to execute in pipe-* bindings, or the escape sequence in
text-bindings).
The first one is the designated “master” copy. Only that one should be
freed.
This fixed a double-free on exit, with e.g.
[text-bindings]
\x1b\x23=Mod4+space Mod4+equal
Closes#1259
The old default, wcswidth, simply calls wcswidth() on the grapheme
cluster. This was supposedly the implementation with the highest
application compatibility. Except we never even tried to measure
it. It was just assumed.
A lot of modern applications have better implementations. Let’s try to
push support for better emoji support by changing our default method
from wcswith to double-width.
While far from correct (it’s not based on the Unicode tables), the
‘double-width’ method produces accurate results anyway.
double-width is like wcswidth(), in that it adds together the
individual wcwidths of all codepoints in the grapheme cluster. But, it
limits the maximum width to 2.
This patch adds a new config option, font-size-adjustment.
It lets you configure how much the font size should be
incremented/decremented when zooming in or out (ctrl-+, ctrl+-).
Values can be specified in points, pixels or percent.
Closes#1188
* Both double and single quotes are recognized. There’s no difference
in how they are handled.
* The entire string must be quoted:
- “a quoted string” - OK
- quotes “in the middle” of a string - NOT ok
* Two escape characters are regonized:
- Backslash
- The quote character itself
This patch adds support for creating utmp records using the ‘utempter’
helper binary from the ‘libutempter’ package.
* New config option ‘main.utempter’
* New meson command line option, -Ddefault-utempter-path. Defaults to
auto-detecting the path.
The default value of the new ‘main.utempter’ config option depends on
the meson command line option ‘-Ddefault-utempter-path’.
If ‘main.utempter’ is *not* set to ‘none’, foot will try to execute
the utempter helper binary to create utmp records when a new terminal
is instantiated. The record is removed when the terminal instance is
destroyed.
Using GCC 12.2.0 with the following build steps:
CFLAGS=-Og meson bld
ninja -C bld
...produces the compiler error:
../config.c:2000:18: error: ‘sym_equal’ may be used uninitialized
[-Werror=maybe-uninitialized]
This commit fixes that by using BUG() to assert that all possible
values are accounted for in the offending switch statement.
This is my variant of the solarized theme, were only the first eight
colors (i.e. the "normal") colors are from the solarized theme. The
remaining eight (the "bright" colors) are brightened versions of the
"normal" colors. This results in a theme that is usually in all
applications, not just those that are "aware" that the terminal color
theme is "solarized".
This adds an "underline-thickness" setting to the "main" section,
similar to the existing "underline-offset" setting. This setting is used
to specify a custom height for regular (= non-cursor) underlines.
Fixes#1136
This mode is activated through the new key-bindings.unicode-input and
search-bindings.unicode-input key bindings.
When active, the user can “build” a Unicode codepoint by typing its
hexadecimal value.
Note that there’s no visual feedback in this mode. This is
intentional. This mode is intended to be a fallback for users that
don’t use an IME.
Closes#1116
This patch adds support for the OSC-133;A sequence, introduced by
FinalTerm and implemented by iTerm2, Kitty and more. See
https://iterm2.com/documentation-one-page.html#documentation-escape-codes.html.
The shell emits the OSC just before printing the prompt. This lets the
terminal know where, in the scrollback, there are prompts.
We implement this using a simple boolean in the row struct ("this row
has a prompt"). The prompt marker must be reflowed along with the text
on window resizes.
In an ideal world, erasing, or overwriting the cell where the OSC was
emitted, would remove the prompt mark. Since we don't store this
information in the cell struct, we can't do that. The best we can do
is reset it in erase_line(). This works well enough in the "normal"
screen, when used with a "normal" shell. It doesn't really work in
fullscreen apps, on the alt screen. But that doesn't matter since we
don't support jumping between prompts on the alt screen anyway.
To be able to jump between prompts, two new key bindings have been
added: prompt-prev and prompt-next, bound to ctrl+shift+z and
ctrl+shift+x respectively.
prompt-prev will jump to the previous, not currently visible, prompt,
by moving the viewport, ensuring the prompt is at the top of the
screen.
prompt-next jumps to the next prompt, visible or not. Again, by moving
the viewport to ensure the prompt is at the top of the screen. If
we're at the bottom of the scrollback, the viewport is instead moved
as far down as possible.
Closes#30
We now bind ctrl+v, ctrl+shift+v, ctrl+y and XF86Paste to pasting from
the clipboard into the scrollback search buffer.
Why all these? Because we can, and because all are common shortcuts
for pasting:
* ctrl+v: “normal” apps use this by default
* ctrl+shift+v: used in terminals (including foot)
* ctrl+y: Emacs
* XF86Paste: special keyboard key, for pasting
Up until now, our Wayland seats have been tracking key bindings. This
makes sense, since the seat’s keymap determines how the key bindings
are resolved.
However, tying bindings to the seat/keymap alone isn’t enough, since
we also depend on the current configuration (i.e. user settings) when
resolving a key binding.
This means configurations that doesn’t match the wayland object’s
configuration, currently don’t resolve key bindings correctly. This
applies to footclients where the user has overridden key bindings on
the command line (e.g. --override key-bindings.foo=bar).
Thus, to correctly resolve key bindings, each set of key bindings must
be tied *both* to a seat/keymap, *and* a configuration.
This patch introduces a key-binding manager, with an API to
add/remove/lookup, and load/unload keymaps from sets of key bindings.
In the API, sets are tied to a seat and terminal instance, since this
makes the most sense (we need to instantiate, or incref a set whenever
a new terminal instance is created). Internally, the set is tied to a
seat and the terminal’s configuration.
Sets are *added* when a new seat is added, and when a new terminal
instance is created. Since there can only be one instance of each
seat, sets are always removed when a seat is removed.
Terminals on the other hand can re-use the same configuration (and
typically do). Thus, sets ref-count the configuration. In other words,
when instantiating a new terminal, we may not have to instantiate a
new set of key bindings, but can often be incref:ed instead.
Whenever the keymap changes on a seat, all key bindings sets
associated with that seat reloads (re-resolves) their key bindings.
Closes#931
The old, complex, way of using a dynamic list to hold each path
component made _some_ sense before, when we needed to support both
~/.config/foot.ini and ~/.config/foot/foot.ini.
But now, it just over complicates things.
With this, it is now possible to map key combos to custom escapes. The
new bindings are defined in a new section, “text-bindings”, on the
form “string=key combo”.
The string can consist of printable characters, or \xNN style hex
digits:
[text-bindings]
abcd = Control+a
\x1b[A = Control+b Control+c Control+d # map ctrl+b/c/d to UP
This fixes a compilation error on FreeBSD:
../../foot/render.c:2055:45: error: no member named 'epoll_shim_close' in 'struct config::(anonymous at ../../foot/config.h:254:9)'
conf_color = &term->conf->csd.color.close;
~~~~~~~~~~~~~~~~~~~~~ ^
/usr/local/include/libepoll-shim/epoll-shim/detail/common.h:8:15:
note: expanded from macro 'close': #define close epoll_shim_close
