When enabled, PUA (Private Usage Area) codepoints are always treated
as double-width glyphs, regardless of the actual glyph width.
Requires allow-overflowing-double-width-glyphs=yes
Works in pretty much the same way as ‘beam-thickness’, except that the
default value is “the font’s underline thickness”.
This means, that when unset, the cursor underline thickness scales
with the font size.
But, when explicitly set, either to a point size value, or a pixel
size, it remains fixed at that size.
Closes#524
When enabled, shades are rendered as solid blocks, using a darker
variant of the current foreground color.
When disabled, shades are instead rendered in a checker box pattern,
using the foreground color unmodified.
Default is enabled.
tll_push_back() is a macro that results in quite a lot of
instructions. Expanding this macro explicitly in many places thus
causes code explosion.
This is what happened in when we generate the default key/mouse
bindings.
Fix by calling tll_push_back() in a no-inline function.
Reduces code size with ~4-5K
Add a separate section for bell configuration, with a bell-specific
command option and a setting to allow that command to run without regard
to keyboard focus (for those of us who enjoy being beeped at at all
times, for example). The actions are also no longer mutually exclusive;
this is primarily anticipating urgency support which cannot be
replicated outside the process (in server mode anyway) and would thus be
complementary to any notification or arbitrary command.
* Rename cursor.style value ‘bar’ to ‘beam’. ‘bar’ remains recognized,
but should eventually be deprecated and then removed.
* Add ‘cursor.beam-thickness’ option, a pt-or-px value specifying the
thickness of the beam cursor. Defaults to 1.5pt.
* Rename (and export) pt_or_px_as_pixels() to
term_pt_or_px_as_pixels()
* Change term_pt_or_px_as_pixels() to round point values instead of
truncating them.
When ‘bold-text-in-bright’ is set ‘to palette-based’, colors matching
one of the 8 regular palette colors are brightened by using the
corresponding bright palette color.
Other colors, or all colors if ‘bold-text-in-bright’ is set to
‘yes|true’, are brightened by increasing the luminance.
When disabled, we render box drawing characters ourselves. This is the
default.
When enabled, we instead use font glyphs. I.e. no special treatment.
Closes#430
When the user has set a custom line-height, we now adjust it when
increasing/decreasing (“zooming”) the font size at run-time.
Previously, the line-height was fixed at the size specified in
foot.ini.
This patch adds a new configuration option,
‘osc8-underline=url-mode|always’.
When set to ‘url-mode’, OSC-8 URLs are only
highlighted (i.e. underlined) in url-mode, just like auto-detected
URLs.
When set to ‘always’, they are always underlined, regardless of mode,
and regardless of their other attributes.
This is implemented by tagging collected URLs with a boolean,
instructing urls_render() and urls_reset() whether they should update
the cells’ ‘url’ attribute or not.
The OSC-8 collecter sets this based on the value of ‘osc8-underline’.
Finally, when closing an OSC-8 URL, the cells are immediately tagged
with the ‘url’ attribute if ‘osc8-underline’ is set to ‘always’.
Up until now, the various key binding modes (“normal”, “search” and
“url”) have used their own struct definitions for their key bindings.
The only reason for this was to have a properly typed “action” (using
the appropriate “action” enum).
This caused lots of duplicated code. This patch refactors this to use
a single struct definition for the “unparsed” key bindings handled by
the configuration, and another single definition for “parsed” bindings
used while handling input.
This allows us to implement configuration parsing, keymap translation
and so on using one set of functions, regardless of key binding mode.
* colors.jump_labels configures the foreground and background colors
used when rendering URL jump labels. Defaults to “regular0
regular3” (i.e. black on yellow).
* colors.urls configures the color to use when highlighting URLs in
URL mode. Note that we aren’t currently doing any
highlighting... Defaults to regular3 (i.e. yellow).
Instead of disabling content centering, delay the TIOCSWINSZ (a.k.a
delay sending the new dimensions to the client) by a small amount
while doing an interactive resize.
Non-interactive resizes are still immediate.
For now, force a resize when the user stops the interactive
resize. This ensures the client application receives the new
dimensions immediately.
It still works without the last, forced, resize, but there typically
be a small delay until the client application receives the final
dimensions.
Closes#301Closes#283
When ‘selection-target’ is set to ‘none’, selecting text does not copy
the text to _any_ clipboard.
This patch also refactors the value parsing to be data driven.
If the value is specified without a unit, then the value is assumed to
be in points, subject to DPI scaling.
The value can optionally have a ‘px’ suffix, in which case the value
is treated as a raw pixel count.
When set, the grid contents is centered in the window. I.e. the
left/right and top/bottom margins are equal (+- 1px).
This causes the content to “jump” while doing an interactive resize,
but may still be preferred in e.g. a tiling WM.
Closes#273
This extends the new ‘dpi-aware’ option with a new default value,
‘auto’.
When set to ‘auto’, fonts are sized using monitors’ DPI when output
scaling is disabled. When output scaling is enabled, fonts are instead
sized using the scaling factor.
The reasoning here is that a user that has enabled output scaling is
obviously *not* relying on DPI scaling.
Output scaling can also be a way to compensate for different viewing
distances, in which case we do *not* want to break that by using DPI
scaling.
Users can still force DPI-only font sizing by setting ‘dpi-aware=yes’,
or disable it completely by setting ‘dpi-aware=no’.
OSC 777 is URxvt’s generic escape to send commands to its perl
extensions. The first parameter is the name of the extension, followed
by its arguments.
OSC 777;notify is a, if not well established, at least a fairly well
known escape sequence to request a (desktop) notification. The syntax
is:
\e]777;notify;<title>;<body>\e\\
Neither title nor body is escaped in any way, meaning they should not
contain a ‘;’.
Foot will split title from body at the *first* ‘;’. Any remaining ‘;’
characters are treated as part of ‘body’.
Instead of adding built-in support for the freedesktop notification
specification (which would require us to link against at least dbus),
add a new config option to foot.ini: ‘notify’.
This option specifies the command to execute when a notification is
received. ‘${title}’ and ‘${body}’ can be used anywhere, in any
combination, and as many times as you want, in any of the command
arguments.
The default value is ‘notify-send -a foot -i foot ${title} ${body}’
When disabled, foot no longers uses outputs’ DPI to scale the
font. Instead, it uses the outputs’ scaling factor.
That is, instead of appending “:dpi=123” to the fontconfig string,
modify the “:pixelsize” or “:size” attribute.
Closes#206
These options lets the user configure custom fonts and styles, to use
with the bold and italic cell attributes.
By default, they are unset, meaning we use the bold/italic variants of
the regular font.
Closes#169.
When csd.preferred == none, we will request CSDs from the compositor,
but internally render as if we are using SSDs. That is, we don’t
render any window decorations at all.
Note that some compositors may ignore our request to use CSDs, and
still render SSDs for us.
Closes#163
This option lets the user configure which characters act as word
delimiters when selecting text.
This affects both “double clicking”, and ‘ctrl-w’ in scrollback search
mode.
Closes#156
Add anew config option, ‘bell=none|set-urgency’. When set to
‘set-urgency’, the margins will be painted in red (if the window did
not have keyboard focus).
This is intended as a cheap replacement for the ‘urgency’ hint, that
doesn’t (yet) exist on Wayland.
Closes#157
Use the new fcft_set_scaling_filter() API to use a non-default scaling
filter.
By default, we use lanczo3, the ‘best’ filter. This overrides the
default in fcft, which is ‘cubic’ filtering.
When enabled, foot will ‘damage’ the entire window, instead of just
the modified/updated rows.
This will force the compositor to redraw/blend the whole window.
This can be used to workaround an issue with fractional scaling in
Gnome, where random thin lines may appear.
Try to detect double-width *glyphs* for single-width *characters*, and
allow them to overflow into the next cell.
This is only done for single-width chars with a glyph width that is at
least 1.5 cells wide, but at most 3 cells.
The feature is gated by the new
‘tweak.allow-overflowing-double-width-glyphs’, and is disabled by
default.
Closes#116
