If the user has configured cursor.style=hollow, make DECSCUSR 1/2 set
the cursor to hollow rather than block, and make DECRQSS DECSCUSR
respond as if cursor.style=block.
The idea is to not expose the hollow variant in DECSCUSR in any way,
to avoid having to extend it with custom encodings.
Another way to think about it is this is just a slightly more
discoverable way of doing:
cursor.style=block
cursor.block-cursor-is-hollow=yes
When the client application emits combining characters, for example
multi-codepoint emojis, in insert-mode, we ended up pushing partial
graphemes to the right, for each codepoint, resulting in too many
cells (and with the wrong content) being inserted.
The fix is fairly simple; don't "insert" when appending characters to
an existing grapheme cluster.
This isn't something we can detect easily in print_insert() (it would
require us to do grapheme clustering again). Fortunately, we do have
the required information in action_utf8_print(). So, pass this
information as a boolean to term_print().
Closes#1947
In fact, there appears there *is* no escape sequence to set the icon.
Keep most of the logic in place, but in practice, we'll always set the
icon to the app-id. That is, at startup, we set it to the configured
app-id (either from config, or the command line).
OSC-176, which sets the app-id, also updates the icon (to the app-id).
* The toplevel icon is now set to the app-id, unless "overridden" by
OSC-1 or OSC-0.
* Implemented OSC-1
* OSC-0 extended to also set the icon
* Implemented CSI 20 t - report window icon
* Implemented CSI 21 t - report window title
* Implemented CSI 22 ; 1 t - push window icon
* Implemented CS 23 ; 1 t - pop window icon
* Extended CSI 22/23 ; 0 t to also push/pop the icon
* Verify app-id set by OSC-176 is valid UTF-8
* Verify icon set by OSC-0/1 is valid UTF-8
Summary of changes:
* Make xvsnprintf() static
* restrict-qualify pointer arguments (as done by the libc equivalents)
* Make comments and spec references more thorough
* Remove pointless `n <= INT_MAX` assertion (see comment)
* Use FATAL_ERROR() instead of xassert() (since the assertion is inside
a shared util function but the caller is responsible for ensuring the
condition holds true)
* Change some callers to use size_t instead of int for the return value
(negative returns are impossible and all subsequent uses are size_t)
The updated comments and code were taken (and adapted) from:
49260bb154/src/util/xsnprintf.c (L6-50)
This work was entirely authored by me and I hereby license this
contribution under the MIT license (stated explicitly, so that
there's no ambiguity w.r.t. the original license).
This implements
https://gist.github.com/rockorager/e695fb2924d36b2bcf1fff4a3704bd83,
in-band window resize notifications.
When user enables private mode 2048 (in-band resize
notifications), *always* send current size, even if the mode is
already active.
This ensures applications can rely on getting a reply from the
terminal.
When changing part of the color palette, through either OSC-4, or
OSC-10 and OSC-11 (and the corresponding reset OSCs: 104, 110 and
111), only dirty affected cells.
We've always done this, but only for OSC-4.
This patch breaks out that logic, and extends it to handle default
fg/bg too.
It also fixes a bug where cells with colored underlines were not
dirtied if the underline was the only part of the cell that was
affected by a OSC-4 change.
The documentation of these sequences are vague and lacking, as is
often the case with XTerm invented control sequences.
I've tried to replicate what XTerm does (as of xterm-392).
The stack represents *stashed/stored* palettes. The currently active
palette is *not* stored on the stack.
The stack is dynamically allocated, and starts out with zero elements.
Now, XTerm has a somewhat weird definition of "pushing" and "popping"
in this context, and the documentation is somewhat misleading.
What a push does is this: it stores the current palette to the stack
at the specified slot. If the specified slot number (Pm) is 0, the
slot used is the current slot index incremented by 1.
The "current" slot index is then set to the specified slot (which is
current slot + 1 if Pm == 0).
Thus, "push" (i.e. when Pm == 0 is used) means store to the "next"
slot. This is true even if the current slot index points into the
middle of stack.
Pop works in a similar way. The palette is restored from the specified
slot index. If the specified slot number is 0, we use the current slot
index.
The "current" slot index is then set to the specified slot -
1 (current slot - 1 if Pm == 0).
XTREPORTCOLORS return the current slot index, and the number of
palettes stored on the stack, on the format
CSI ? <slot index> ; <palette count> # Q
When XTPUSHCOLORS grows the stack with more than one element (i.e. via
a 'CSI N # P' sequence), make sure *all* new slots are initialized (to
the current color palette). This avoids uninitialized slots, that
could then be popped with XTPOPCOLORS.
Closes#856
The things affecting which ASCII printer we use have grown...
Instead of checking everything inside term_update_ascii_printer(), use
a bitfield.
Anything affecting the printer used, must now set a bit in this
bitfield. This makes term_update_ascii_printer() much faster, since
all it needs to do is check if the bitfield is zero or not.
This is work in progress, and fairly untested.
This adds initial tracking of styled underlines. Setting attributes
seems to work (both color and underline style). Grid reflow has *not*
been tested.
When rendering, style is currently ignored (all styles are rendered as
a plain, legacy underline).
Color however, *is* applied.
Before this patch, we reported scaled pixel values. This was rather
useless, since applications have no way of getting the scaling factor,
to "scale up" e.g. images.
Furthermore, the most common use of these queries are probably to
calculate the dimensions to use when emitting sixels.
Closes#1643
This functions reads the four top/left/bottom/right parameters,
validates them, and converts relative row numbers to absolute.
Returns true if the params are valid, otherwise false.
* DECCARA - change attributes in rectangular area
* DECRARA - reverse attributes in rectangular area
* DECCRA - copy rectangular area
* DECFRA - fill rectangular area
* DECERA - erase rectangular area
Not implemented:
* DECSERA - selective erase rectangular area
This implements private mode 2027 - grapheme cluster processing, as
defined in the "Terminal Unicode Core"[1] specification.
Internally, we just flip the already existing option "grapheme
shaping". Since it's now runtime changeable, we need a copy of it in
the terminal struct, rather than referencing the conf object.
[1]: 13fc5a8993/spec/terminal-unicode-core.tex (L50-L53)
* In all calls to wl_subsurface_set_position()
* (wp_viewport_set_destination() already does this)
* Whenever we use the scale to calculate margins (search box,
scrollback indicator etc)
* Since the scaling factor is stored as a float (and not a double),
use roundf() instead of round()
We don’t support neither 132 column mode, nor smooth scrolling. Thus
it makes little sense to recognize these control condes.
Note that while XTerm does support 132 columns, it is disabled by
default. In this mode, XTerm also doesn’t trigger the
side-effects (i.e. clearing the screen).
Closes#1265
This fixes an issue where selections in the scroll margins were not
detected correctly. This meant they weren’t canceled as they should
have been, which in turn caused a visual glitch where text appeared to
be selected, but were in fact not.
The status value 4 means "permanently reset", as opposed to 2, which
means "reset". The former implies that there's no way to enable the
mode because it's unsupported (but recognized).
Note: this commit also fixes an unrelated typo in CHANGELOG.md.
Indexed color values are stored in the cell attributes as color
indices (into the 256-color table). However, the index from the CSI
was not validated in any way, meaning you can do something like this:
echo -e ‘\e[38:5:1024m CRASH \e[m’
and foot will crash on an out-of-bounds access.
Fix by clamping the color index.
Closes#1111
