The main reason for having two color sections is to be able to switch
between dark and light. Thus, it's better if the section names reflect
this, rather than the more generic 'colors' and 'colors2' (which was
the dark one and which was the light one, now again?)
When the second color section was added, we kept the original name,
colors, to make sure we didn't break existing configurations, and
third-party themes.
However, in the long run, it's probably better to be specific in the
section naming, to avoid confusion.
So, add 'colors-dark', and 'colors-light'. Keep 'colors' and 'colors2'
as aliases for now, but mark them as deprecated. They WILL be removed
in a future release.
Also rename the option values for initial-color-theme, from 1/2, to
dark/light. Keep the old ones for now, marked as deprecated.
Update all bundled themes to use the new names. In the light-only
themes (i.e. themes that define a single, light, theme), use
colors-light, and set initial-color-theme=light.
Possible improvements: disable color switching if only one color
section has been explicitly configured (todo: figure out how to handle
the default color theme values...)
Before this patch, we always blended towards black when dimming
text. However, with light color themes, it usually looks better if we
dim towards white instead.
This option allows you to choose which color to blend towards.
The default is 'black' in '[colors]', and 'white' in '[colors2]'.
Closes#2187
This makes the "uppercase hint character inserts selected text"
behavior added in #1975 configurable, as it can have unexpected
behavior for some users.
It defaults to "on", preserving the new behavior of `foot`, after
Fixes#2159.
Before this patch, the grid content was *always* centered when the
window was maximized or fullscreened, regardless of how the user had
configured padding.
Now, the behavior is controlled by the 'pad' option. Before this
patch, the syntax was
pad MxN [center]
Now it is
pad MxN [center|center-when-fullscreen|center-when-maximized-and-fullscreen]
The default is "pad 0x0 center-when-maximized-and-fullscreen", to
match current behavior.
Closes#2111
This option selects which color theme to use by default. I.e. at
startup, and after a reset.
This is useful with combined theme files, where a single file defines
e.g. both a dark and light version of the theme.
* color-theme-switch-1: select the primary color theme
* color-theme-switch-2: select the alternative color theme
* color-theme-toggle: toggle between the primary and alternative color themes
This section defines an alternative color theme. The keys are the same
as in the 'colors' section, as are the default values.
Values are *not* inherited from 'colors'. That is, if you set a value
in 'colors', but not in 'colors2', it is *not* inherited by 'colors2'.
The old one is in some cases too liberal. The new one is stricter in
two ways:
1. The protocol list is now explicit, rather than matching anything://
2. Allowed characters are now limited to the "safe character set", the
"reserved character set", and some from the "unsafe character set"
Furthermore, some of the characters are restricted in how/when they
are allowed:
1. Periods, commas, question marks etc are allowed inside an URL, but
not at the end.
2. [ ], ( ), " " and ' ' are allowed but only when balanced. This
allows us to match e.g. [http://foo.bar/foo[bar]] correctly.
Closes#2016
When auto-matching URLs (or custom regular expressions), use the
first *subexpression* as URL, rather than the while regex match.
This allows us to write custom regular expressions with prefix/suffix
strings that should not be included in the presented match.
Users can now define their own regex patterns, and use them via key
bindings:
[regex:foo]
regex=foo(bar)?
launch=path-to-script-or-application {match}
[key-bindings]
regex-launch=[foo] Control+Shift+q
regex-copy=[foo] Control+Mod1+Shift+q
That is, add a section called 'regex:', followed by an
identifier. Define a regex and a launcher command line.
Add a key-binding, regex-launch and/or regex-copy (similar to
show-urls-launch and show-urls-copy), and connect them to the regex
with the "[regex-name]" syntax (similar to how the pipe-* bindings
work).
From the release notes:
system bell - allowing e.g. terminal emulators to hand off system
bell alerts to the compositor for among other things accessibility
purposes
The new protocol is used when the new config option
bell.system=yes (and the compositor implements the protocol,
obviously).
The system bell is rung independent of whether the foot window has
keyboard focus or not (thus relying on compositor configuration to
determine whether anything should be done or not in response to the
bell).
The new option is enabled by default.
This implements part of the new 's' (sound) parameter; the 'silent'
value. When s=silent, we set the ${muted} template argument to
"true". It is intended to set the 'suppress-sound' hint:
notify-send --hint BOOLEAN:suppress-sound:${muted}
* Don't store a list of unfinished notifications. Use a single one. If
the notification ID of the 'current' notification doesn't match the
previous, unfinished one, the 'current' notification replaces the
previous one, instead of updating it.
* Update xstrjoin() to take an optional delimiter (for example ','),
and use that when joining categories and 'alive IDs'.
* Rename ${action-arg} to ${action-argument}
* Update handling of the 'n' parameter (symbolic icon name); the spec
allows it to be used multiple times, and the terminal is supposed to
pick the first one it can resolve. Foot can't resolve icons at all,
neither can 'notify-send' or 'fyi' (which is what foot typically
executes to display a notification); it's the notification daemon that
resolves icons.
The spec _could_ be interpreted to mean the terminal should lookup
.desktop files, and use the value of the 'Icon' key from the first
matching .desktop files. But foot doesn't read .desktop files, and I
don't intend to implement XDG directory scanning and parsing of
.desktop files just to figure out which icon to use.
Instead, use a simple heuristics; use the *shortest* symbolic
names. The idea is pretty simple: plain icon names are typically
shorter than .desktop file IDs.
First, icons have been finalized in the specification. There were only
three things we needed to adjust:
* symbolic names are base64 encoded
* there are a couple of OSC-99 defined symbolic names that need to be
translated to the corresponding XDG icon name.
* allow in-band icons without a cache ID (that is, allow applications
to use p=icon without having to cache the icon first).
Second, add support for the following new additions to the protocol:
* 'f': custom app-name, overrides the terminal's app-id
* 't': categories
* 'p=alive': lets applications poll for currently active notifications
* 'id' is now 'unset' by default, rather than "0"
* 'w': expire time (i.e. notification timeout)
* "buttons": aka actions. This lets applications add additional (to
the terminal defined "default" action) actions. The 'activated' event
has been updated to report which button/action was used to activate
the notification.
To support button/actions, desktop-notifications.command had to be
reworked a bit.
There's now a new config option:
desktop-notifications.command-action-arg. It has two template
arguments ${action-name} and ${action-label}.
command-action-arg gets expanded for *each* action.
${action-name} and ${action-label} has been replaced by ${action-arg}
in command. This is a somewhat special template, in that it gets
replaced by *all* instances of the expanded actions.
Add a new config option, desktop-notifications.close, defining what to
execute to close a notification. It has a single template parameter,
${id}, that is expanded to the external notification ID foot may have
picked up from the notification helper.
notify-send does not support closing notifications, and it appears
impossible to pass an *unsigned* integer as argument to gdbus. Hence
no default value for the new 'close' option.
Example:
printf '\e]99;i=123;this is a notification\e\\'
printf '\e]99;i=123:p=close;\e\\'
Split it up into two, ${action-name} and ${action-label}.
Dunstify, for example, has a different syntax compared to notify-send:
notify-send: default=foobar
dunstify: default,foobar
Only do it when the notification was activated.
Here, activated means the 'click to activate' notification action was
triggered.
How do we tie everything together?
First, we add a new template parameter, ${action}. It's intended to be
used with e.g. notify-send's --action option.
When the action is triggered, notify-send prints its name on stdout,
on a separate line. Look for this in stdout. Only if we've seen it do
we focus/report the notification.
This patch adds support for window focusing, and sending events back
to the client application when a notification is closed.
* Refactor notification related configuration options:
- add desktop-notifications sub-section
- deprecate 'notify' in favor of 'desktop-notifications.command'
- deprecate 'notify-focus-inhibit' in favor of
'desktop-notifications.inhibit-when-focused'
* Refactor: rename 'struct kitty_notification' to 'struct
notification'
* Pass a 'struct notification' to notify_notify(), instead of many
arguments.
* notify_notify() now registers a reaper callback. When the notifier
process has terminated, the notification is considered closed, and we
either try to focus (activate) the window, or send an event to the
client application, depending on the notification setting.
* For the window activation, we need an XDG activation token. For now,
assume *everything* written on stdout is part of the token.
* Refactor: remove much of the warnings from OSC-99; we don't
typically log anything when an OSC/CSI has invalid values.
* Add icon support to OSC-99. This isn't part of the upstream
spec. Foot's implementation:
- uses the 'I' parameter
- the value is expected to be a symbolic icon name
- a quick check for absolute paths is done, and such icon requests
are ignored.
* Added ${icon} to the 'desktop-notifications.command' template. Uses
the icon specified in the notification, or ${app-id} if not set.
This adds limited support for OSC-99, kitty desktop notifications[^1]. We
support everything defined by the "protocol", except:
* 'a': action to perform on notification activation. Since we don't
trigger the notification ourselves (over D-Bus), we don't know a)
which ID the notification got, or b) when it is clicked.
* ... and that's it. Everything else is supported
To be explicit, we *do* support:
* Chunked notifications (d=0|1), allowing the application to append
data to a notification in chunks, before it's finally displayed.
* Plain UTF-8, or base64-encoded UTF-8 payload (e=0|1).
* Notification identifier (i=xyz).
* Payload type (p=title|body).
* When to honor the notification (o=always|unfocused|invisible), with
the following quirks:
- we don't know when the window is invisible, thus it's treated as
'unfocused'.
- the foot option 'notify-focus-inhibit' overrides 'always'
* Urgency (u=0|1|2)
[^1]: https://sw.kovidgoyal.net/kitty/desktop-notifications/
BTN_BACK and BTN_FORWARD are separate buttons. The scroll wheel don't
have any button mappings in libinput/wayland, so make up our own
defines.
This allows us to map them in mouse bindings.
Also expose BTN_WHEEL_{LEFT,RIGHT}. These were already defined, and
used, internally, to handle wheel tilt events. With this, they can
also be used in mouse bindings.
Finally, fix encoding used for BTN_{BACK,FORWARD} when sending mouse
button events to the client application. Before this, they were mapped
to buttons 4/5. But, button 4/5 are for the scroll wheel, and as
mentioned above, BTN_{BACK,FORWARD} are not the same as scroll wheel
"buttons".
Closes#1763
This patch changes the default of triple clicking, from selecting the
current logical row, to first trying to select the contents of the
quote under the cursor, and if failing to find a quote, selecting the
current row (like before).
This is implemented by adding a new key binding, 'select-quote'.
It will search for surrounding quote characters, and if one is found
on each side of the cursor, the quote is selected. If not, the entire
row is selected instead.
Subsequent selection operations will behave as if the selection is
either a word selection (a quote was found), or a row selection (no
quote found).
Escaped quote characters are not supported: "foo \" bar" will match
'foo \', and not 'foo " bar'.
Mismatched quotes are not custom handled. They will simply not match.
Nested quotes ("123 'abc def' 456") are supported.
Closes#1364
