#!/bin/sh
#
# Copyright (c) 2004 Mikael Magnusson <mikma@users.sourceforge.net>
#

LO10K1=@bindir@/lo10k1

#LO10K1="valgrind --num-callers=6 ../lo10k1"

DEBUG=0

function runlo10k1
{
    if test $DEBUG -gt 2 ; then
	echo $LO10K1 "$@"
    fi

    $LO10K1 "$@"

    res=$?
    

    if test $res -ne 0 ; then
	echo Failed $LO10K1 "$@"
    fi
}

function connect
{
    from=$1
    op=$2
    to=$3

    if test $DEBUG -gt 1 ; then
	echo "connect  $from $op $to"
    fi

    runlo10k1 --conadd "$from$op$to"
}

function copy
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 0 ; then
	echo "copy              \"$name\" $port"
    fi

    # Copy
    runlo10k1 -n --patch_name "$name Copy" -a copy_2.emu10k1
    # Input
    connect "PIN($name Copy)" '=' "$port"
}

function volume
{
    local name=$1
    local port=$2
    local default=$3

    if test $DEBUG -gt 1 ; then
	echo "volume            \"$name\" $port default=$default"
    fi

    # Volume
    runlo10k1 -n --ctrl "c-Left,Right:$name Volume,t-$name Volume:1,s-$name Volume:$default" --patch_name "$name Volume" -a vol_2.emu10k1
    # Input
    connect "PIN($name Volume)" '=' "$port"
}

function master_volume
{
    local name=$1
    local port=$2
    local default=$3

    if test $DEBUG -gt 1 ; then
	echo "master volume \"$name\" $port default=$default"
    fi

    # Master
    runlo10k1 -n --ctrl "c-VolM:$name Volume,t-$name Volume:1,s-$name Volume:$default" --patch_name "$name Volume" -a vol_master.emu10k1
    # Input
    connect "$port" '=' "PIN($name Volume)"
}

function switch
{
    local name=$1
    local port=$2
    local default=$3

    if test $DEBUG -gt 1 ; then
	echo "switch            \"$name\" $port default=$default"
    fi

    # Switch
    runlo10k1 -n --ctrl "c-switchL,switchR:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_2.emu10k1
    # Input
    connect "PIN($name Switch)" '>' "$port"
}

function master_switch
{
    local name=$1
    local port=$2
    local default=$3

    if test $DEBUG -gt 1 ; then
	echo "master_switch \"$name\" $port default=$default"
    fi

    # Master switch
    runlo10k1 -n --ctrl "c-switch:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_6.emu10k1
    # Input
    connect "PIN($name Switch)" '=' "$port"
}

function playback
{
    name=$1
    port=$2

    if test $DEBUG -gt 0 ; then
	echo "playback          \"$name\" $port"
    fi

    # Switch
    switch "$name Playback" "$port" "1#1"
    volume "$name Playback" "POUT($name Playback Switch)" "0#0"
    # Output
    connect "POUT($name Playback Volume)" '>' "PIN(Wave Stereo To 51,0,1)"
}

function playback_noswitch
{
    name=$1
    port=$2

    if test $DEBUG -gt 0 ; then
	echo "playback_noswitch \"$name\" $port"
    fi

    # Switch
    volume "$name Playback" "$port" "0#0"
    # Output
    connect "POUT($name Playback Volume)" '>' "PIN(Wave Stereo To 51,0,1)"
}

function capture
{
    name=$1
    port=$2

    if test $DEBUG -gt 0 ; then
	echo "capture           \"$name\" $port"
    fi

    # Capture switch
    switch "$name Capture" "$port" "0#0"
    volume "$name Capture" "POUT($name Capture Switch)" "100#100"
    # Output
    connect "POUT($name Capture Volume)" '>' "OUT(OUT_PCM_Capture_Left,OUT_PCM_Capture_Right)"
}

function capture_noswitch
{
    name=$1
    port=$2

    if test $DEBUG -gt 0 ; then
	echo "capture_noswitch  \"$name\" $port"
    fi

    # Capture switch
    volume "$name Capture" "$port" "100#100"
    # Output
    connect "POUT($name Capture Volume)" '>' "OUT(OUT_PCM_Capture_Left,OUT_PCM_Capture_Right)"
}

function master
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 0 ; then
	echo "master \"$name\" $port"
    fi

    # Switch
    master_volume "$name Playback" "$port" "100"
    master_switch "$name Playback" "POUT($name Playback Volume)" "1"
}

function dump_patches
{
    num=$1

    for (( i=0; $i < $num; i=$i+1 )); do
	p=$(( $i + 100))
	runlo10k1 --debug $p
    done


    exit
}


function simple_stereo_to_51
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 1 ; then
	echo "simple_stereo_to_51 \"$name\" $port"
    fi

# Stereo to 5.1
    runlo10k1 -n --ctrl "c-Left,Right:$name Playback Volume,t-$name Playback Volume:1,s-$name Playback Volume:100#100,c-LeftSurr,RightSurr:$name Surround Playback Volume,t-$name Surround Playback Volume:1,c-Center:$name Center Playback Volume,t-$name Center Playback Volume:1,c-LFE:$name LFE Playback Volume,t-$name LFE Playback Volume:1" --patch_name "$name Stereo To 51" -a sto51.emu10k1
# Input
    connect "$port" '>' "PIN($name Stereo To 51,0,1)"

# Output
    connect "POUT($name Stereo To 51,0,1,2,3,4)" '>' "PIN(Tone Control,0,1,2,3,4)"
}

function prologic
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 1 ; then
	echo "prologic \"$name\" $port"
    fi

# Stereo to 5.1
    runlo10k1 -n --ctrl "" --patch_name "$name Stereo To 51" -a prologic.emu10k1
# Input
    connect "PIN($name Stereo To 51,0,1)" '>' "$port"

# PCM Multi
    runlo10k1 -n --ctrl "c-Left,Right:$name Playback Volume,t-$name Playback Volume:1,c-LeftSurr,RightSurr:$name Surround Playback Volume,t-$name Surround Playback Volume:1,c-Center:$name Center Playback Volume,t-$name Center Playback Volume:1,c-LFE:$name LFE Playback Volume,t-LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
# Input
    connect "POUT($name Stereo To 51)" '=' "PIN($name Multi Volume,0,1,2,3,4)"

# Output
    connect "POUT($name Multi Volume,0,1,2,3,4)" '>' "PIN(Tone Control,0,1,2,3,4)"
}

function stereo_to_51
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 0 ; then
	echo "stereo_to_51 \"$name\" $port"
    fi

#    simple_stereo_to_51 "$name" "$port"
    prologic "$name" "$port"

}

function tone
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 0 ; then
	echo "tone \"$name\" $port"
    fi

#
# Tone
#
    runlo10k1 -n --ctrl "c-bass0,bass1,bass2,bass3,bass4:$name - Bass,t-$name - Bass:2,v-$name - Bass:1,c-treble0,treble1,treble2,treble3,treble4:$name - Treble,t-$name - Treble:3,v-$name - Treble:1,c-toneonoff:$name - Switch,t-$name - Switch:4" --patch_name "${name}" -a tone.emu10k1
}

function multi_playback
{
    local name=$1
    local port=$2

    if test $DEBUG -gt 0 ; then
	echo "multi_playback \"$name\" $port"
    fi

# PCM Multi
    runlo10k1 -n --ctrl "c-Left,Right:PCM Front Playback Volume,t-PCM Front Playback Volume:1,c-LeftSurr,RightSurr:Surround Playback Volume,t-Surround Playback Volume:1,c-Center:Center Playback Volume,t-Center Playback Volume:1,c-LFE:LFE Playback Volume,t-LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
# Input
    connect "PIN($name Multi Volume)" '>' "$port"
# Output
    connect "POUT($name Multi Volume)" '>' "PIN(Tone Control)"
}

function fxbus
{
    runlo10k1 --patch_name "FX Bus" -a fxbus.emu10k1
    connect "PIN(FX Bus)" '=' "FX(FX_PCM_Left,FX_PCM_Right,FX_PCM_Surr_Left,FX_PCM_Surr_Right,FX_MIDI_Left,FX_MIDI_Right,FX_Center,FX_LFE,8,9)"

    fx_multi="POUT(FX Bus,0,1,2,3,6,7)"
    fx_front="POUT(FX Bus,0,1)"
    fx_rear="POUT(FX Bus,2,3)"
    fx_midi="POUT(FX Bus,4,5)"
    fx_pcm="POUT(FX Bus,8,9)"
}

#dump_patches 16

runlo10k1 -s 

tone "Tone Control"

fxbus

#copy "FX89" "FX(8,9)"
stereo_to_51 "Wave" "$fx_pcm"

#
# FXBUS
#
multi_playback "PCM" "$fx_multi"

capture "PCM Front" "$fx_front"
capture "Wave" "$fx_pcm"
capture "Surround" "$fx_rear"

playback "Music" "$fx_midi"
capture "Music" "$fx_midi"


#
# INPUTS
#
playback "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"
capture_noswitch "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"

# playback "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"
# capture "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"

# playback "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"
# capture "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"

# playback "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"
# capture "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"

# playback "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"
# capture "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"

# playback "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"
# capture "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"

# playback "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"
# capture "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"


master_volume="Master_2 Playback Volume"
master_switch="Master_2 Playback Switch"

master "Master_2" "POUT(Tone Control)"
connect "POUT($master_switch)" '>' "OUT(OUT_AC97_Left,OUT_AC97_Right,OUT_Analog_Surr_Left,OUT_Analog_Surr_Right,OUT_AC97_Center,OUT_AC97_LFE)"

exit
# Headphone

# Headphone Switch
runlo10k1 -n --ctrl "c-switchL:Headphone Center Playback Switch,c-switchR:Headphone LFE Playback Switch,t-Headphone Center Playback Switch:4,t-Headphone LFE Playback Switch:4,i-Headphone Center Playback Switch:1,i-Headphone LFE P\
layback Switch:1" --patch_name "Headphone Center Playback Switch" -a switch_2.emu10k1
#Input
#connect "POUT(Headphone Playback Volume)" '' "PIN(Headphone Center Playback Switch)"
#Output
#connect "POUT(Headphone Center Playback Switch,0,1)" '' "OUT(OUT_Headphone_Left,OUT_Headphone_Right)"

# Headphone Volume
runlo10k1 -n --ctrl "c-Left,Right:Headphone Playback Volume,t-Headphone Playback Volume#1:1,i-Headphone Playback Volume:1" --patch_name "Headphone Playback Volume" -a vol_2.emu10k1
#Input
#runlo10k1 --conadd "PIN(Headphone Playback Volume,0,1)>PIN(Wave Stereo To 51,0,1)"
#connect "POUT(Headphone Playback Volume,0,1)" '>' "PIN(Wave Stereo To 51,0,1)"
#connect "POUT(Tone Control,0,1)" '=' "PIN(Headphone Playback Volume,0,1)"
#connect "POUT(Headphone Playback SwitchTone Control,0,1)" '=' "PIN(Headphone Playback Volume,0,1)"

#Output
runlo10k1 -n --ctrl "c-enableL,enableR:IEC958 Optical Raw Playback Switch,t-IEC958 Optical Raw Playback Switch:4" --patch_name "Output" -a output.emu10k1
#Inputs
runlo10k1 --conadd "POUT(Master Switch)=PIN(Output,0,1,2,3,4,5)"
#runlo10k1 --conadd "PIN(Output,6,7)=FX(20,21)"
#Output
runlo10k1 --conadd "POUT(Output,0,1,2,3,4,5)=OUT(0,1,8,9,17,18)"
runlo10k1 --conadd "POUT(Output,6,7,8,9,10,11)=OUT(0,1,2,3,4,5)"