Phiree U2 has an unusual configuration. It only has S/PDIF output, but
there are still two devices presented:
- device 0: PCM audio, subject to volume control
- device 1: non-PCM data (passthrough), not subject to volume control
It looks like the AES bits are set according to the selected device,
since outputting PCM data via device 1 will not work (silence).
Currently only the device 0 is shown via the "iec958" alias, and the
second device is not accessible via hinted aliases.
Simply provide access to both of these devices via the "iec958" alias.
Reported-by: touc @ XBMC forum
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The M-Audio Delta 1010 card has 7.1 analog output, but no ready-made pcm
definition to use it.
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
Reported-and-tested-by: Matt Zagrabelny <mzagrabe@d.umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All cards that support 4.1 surround now also support 2.1 surround,
because they both have surround 5.1 as slave.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some new AMD cards have HDA codecs presenting 6 connected HDMI/DP pin
nodes (plus 1 unconnected pin node) according to the ALSA card database.
Example:
http://www.alsa-project.org/db/?f=de3ced7af41de0ed54d218650e5e2f16c511787b
Bump the maximum number of presented HDMI outputs per card via the
"hdmi" PCM from 4 to 8 (so that the last possible device is DEV=7).
Note that HDMI PCM devices DEV=4..7 use shared PCM device numbers, so
HDA cards that have over 4 audio PCM devices or multiple S/PDIF or modem
devices will have their remaining PCM devices misrepresented as HDMI
devices.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Scarlett 2i2 USB interface does not have any S/PDIF connections.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yet another headset without digital I/O.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When both an SPDIF and an HDMI output are present on HD-audio, both
try to access IEC958 controls with index=0 although one of them must
be wrong. For avoiding this conflict, the recent kernel code (3.9 and
3.8 stable) moves the IEC958 controls of an SPDIF with index=16 once
when the conflict happens.
In this patch, the corresponding support is added in alsa-lib side.
The new "skip_rest" boolean flag is added to the hooked element
definition which indicates that the rest of element array will be
ignored once when this element is present and evaluated. With this
new flag, the HD-audio config takes index=16 primarily, then take
index=0 as fallback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of a single channel map, multiple channel maps can be provided
in a form of compound (array) to hw and null plugins. In null
get_chmap, the channel map corresponding to the current channels is
copied from the given channel maps.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These cards won't provide the channel maps from the driver itself
because of the dynamic routing. For simplicity, define chmaps in the
configurations, so that chmap querying of individual stereo streams
and combined multi streams works properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These devices don't have digital in/out, so prevent them from being
opened.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add "Logitech Wireless Headset" and "Logitech Speaker Lapdesk N700" to
the iec958 blacklist.
Also reorder the list in alphabetic order.
BugLink: https://bugs.launchpad.net/bugs/987163
Reported-by: Jean-Baptiste Lallement <jean-baptiste@ubuntu.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Sennheiser USB headset has no S/PDIF input or output, so make
sure we can't open it that way.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some common USB devices are analog only, so prevent the digital
devices from being opened. This simplifies probing the device
in PulseAudio.
I have a "Logitech USB Headset" myself, the "Logitech Web Camera"
was reported by Raymond Yau, and the "Blue Snowball" was reported by
Andy Whitcroft.
Cc: Andy Whitcroft <andy.whitcroft@canonical.com>
Cc: Raymond Yau <superquad.vortex2@gmail.com>
BugLink: https://bugs.launchpad.net/bugs/940145
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BugLink: https://bugs.launchpad.net/bugs/433573
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add asym to front, rear and center_lfe to prevent route change after
removed the lock.
After removed the lock, when application using "hw", "front", "rear",
"surround40" and "surround51", the route of the front channel is
changed (lost right channel or both channels) when other application
using "front", "rear" or "center_lfe" to record
Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The subdevice 0 is used for multi-channel outputs.
This fixes the detection of multi-channel devices of VIA codecs
by PulseAudio.
Reported-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Locking the controls in hooks causes a BUSY error when multiple
streams are opened, typically in PulseAudio. Better not to touch
the locking in hooks in such a case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The controls referred in center_lfe definition in EMU10K1.conf should be
marked as optional since some boards don't have these.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ICE1712 kernel driver accepts 10 playback channels and
12 recording channels only. Therefore fix this channel count
in alsa-lib.
BugLink: http://bugs.launchpad.net/bugs/178442
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add entries for all the aliases of the CMI8788 chip.
(Not all of them are currently used by the driver.)
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The device name of the M-Audio AudioPhile USB is actually "Audiophile USB (tm)".
Also keep the old string, just to be sure.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
As discussed with Takashi, removing the lock allows apps to mute
the output using the mixer interface.
Other AES controls remain locked.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 92608badc519a8c1f65d93743396517aaa582b53 in linux kernel added
the possibility of 3 additional HDMI devices on indexes 7-9.
Present all those additional devices using the "hdmi" alias as well.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add custom definitions for the AudioPhile "default" and "iec958" devices
so that output and input are routed to the correct PCM device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Since some digital mics have the phase-inversion problem in one channel,
adding both channels for mono stream results in the noise.
Use route_policy copy to avoid that situation.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The change that removed the Master controls for Xonar D2(X) cards was
reverted, so we don't need to use the softvol plugin anymore ...
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The hd-audio driver may have no analog stream but only a digital one
which has usually non-zero device number. To avoid the bogus namehint,
set hint.device 0 for pcm.default (it wasn't handled properly due to
asym).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The system-wide default PCM config works now (by the fix of plug
mmap_emul support), thus no card-specific hackish config is needed
for GUS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Master Volume controls were removed from Xonar D2/D2X cards; add the
softvol plugin so that we have at least PCM volume.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
The ice1724-based cards can handle only 32bit while the apps almost
expet 16bit format for SPDIF I/O. This prevents the default config
working on many apps like mplayer, xine, etc.
This patch simply adds the least automatic conversion by linear plugin.
Note that "plug" isn't used here. Otherwise we get a problem of the
routing (plug over plug is buggy).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"./configure" options for selecting ALSA configuration (default
/usr/share/alsa) and plugin (/usr/lib/alsa-lib) directories introduced
by alsa-hg/alsa-lib changeset 2284 cause problems with cross-compilation
and packaging - there is no way to redefine them in runtime, during
installation phase.
This patch adds a level of indirection between constants and their
usage - alsaconfigdir for ALSA_CONFIG_DIR and alsaplugindir for
ALSA_PLUGIN_DIR - which can be redefined during "make install" stage.
Signed-off-by: Pawel MOLL <pawel.moll@st.com>
