EPIPE is defined as XRUN which is not entirely correct in this condition
failing to write to a file in pcm_file plugin can not be simply recovered
by a retry as user of the api might be led to believe when receiving EPIPE
use EIO instead to indicate a different kid of error that may not be
recoverable by retry
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_file_add_frames called two times by mistake, introduced in
2a800c0c4f
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
when writing to output file fails, api user is notified and can handle
recovery
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
previously playback could be interrupted by snd_pcm_file_add_frames:
assert(file->wbuf_used_bytes < file->wbuf_size_bytes)
in case snd_pcm_file_write_bytes fails to write full amount of bytes
to file, variable wbuf_used_bytes would not be fully decremented by
requested amount of bytes function was called with
for the assert to trigger, multiple write fails need to happen, so
that wbuf_used_bytes overflows wbuf_size_bytes,
this patch will allow application to report error code to api user
who might have an idea how to recover, before assert is triggered,
also reporting error along with the print out message might give user
a better idea of what is going on, where previously reason for
mentioned assert was not immediately clear
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pointer operand to the binary `+` operator must be to a complete
object type.
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A return statement with an expression in a function returning void is
a constraint violation.
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Case ranges are a GNU extension, and provide only a slight readability
improvement.
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
They are equivalent, but __func__ is in C99. __FUNCTION__ exists only
for backwards compatibility with old gcc versions.
Signed-off-by: Michael Forney <mforney@mforney.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
mmap_begin callback is used to copy data from input file to mmaped
buffer
guard for corner use of api (multiple mmap_begin calls by user) is
introduced to check if next continuous buffer was already overwritten
buffer is overwritten with input file data only in case of stream capture
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
main motivation for adding the callback is to use it to enable operation
on mmaped buffer before user access for pcm_file plugin
support for MMAP read access with masking by data from input file is not
implemented for pcm_file plugin, by adding this callback implementing
such feature can be done by rewriting next continuous portion of buffer
on each mmap_begin call
plugins like softvol use pcm_plugin interface and overwrite the buffer by
looping around it in avail_update callback, this patch hopes to simplify
the task by adding new api callback, removing the need for rewriting
pcm_file (to use pcm_plugin callbacks) and careful checking when looping
around whole mmaped buffer
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding a new Conexant CX2072X codec profile and reusing the existing
BYT/CHT platform snippets.
Currently tested only on ASUS E200HA laptop.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
use previously introduced helper function, this commit unifies behavior
of readi and readn
corner case behavior of readi is changed by this commit, previously,
in case 0 bytes were red from file (EOF), frames = 0 was returned,
signaling api user as if no data was red from slave, after the patch,
amount of frames red from slave with data red from slave stored in buffer
is returned when EOF is reached
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
add helper function to copy input file data to buffer mapped by areas,
in case of an error, do not fill the areas, allowing device read buffer
to be provided to api caller
previously unused rbuf variable is reused for this purpose
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Reviewed-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change adapt the fix commit 6b058fda9d
("pcm: dmix: Add option to allow alignment of slave pointers")
for dsnoop plugin
Issue is that snd_pcm_wait() goes back to waiting because the hw_ptr
is not period aligned. Therefore snd_pcm_wait() will block for a longer
time as required.
With these rcar driver changes the exact position of the dma is returned.
During snd_pcm_start they read hw_ptr as reference, and this hw_ptr
is now not period aligned, and is a little ahead over the period while it
is read. Therefore when the avail is calculated during snd_pcm_wait(),
it is missing the avail_min by a few frames.
An additional option hw_ptr_alignment is provided to dsnoop configuration,
to allow the user to configure the slave application and hw pointer
alignment at startup
Signed-off-by: Vanitha Channaiah <vanitha.channaiah@in.bosch.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change adapt the fix commit 6b058fda9d
("pcm: dmix: Add option to allow alignment of slave pointers")
for dshare plugin
Issue is that snd_pcm_wait() goes back to waiting because the hw_ptr
is not period aligned. Therefore snd_pcm_wait() will block for a longer
time as required.
With these rcar driver changes the exact position of the dma is returned.
During snd_pcm_start they read hw_ptr as reference, and this hw_ptr
is now not period aligned, and is a little ahead over the period while it
is read. Therefore when the avail is calculated during snd_pcm_wait(),
it is missing the avail_min by a few frames.
An additional option hw_ptr_alignment is provided to dshare configuration,
to allow the user to configure the slave application and hw pointer
alignment at startup
Signed-off-by: Vanitha Channaiah <vanitha.channaiah@in.bosch.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the code snd_pcm_direct_reset_slave_ptr() from pcm_dmix.c
to pcm_direct.c and its header so that the helper function can be
re-used by other direct-pcm plugins.
There is no change in the behavior or the functionality.
Signed-off-by: Vanitha Channaiah <vanitha.channaiah@in.bosch.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Unfortunately, the master_slave buffer pointers are not always in sync with
the presented avail value and the higher layers (like write_areas) got
confused. Create own hw_ptr and appl_ptr.
This commit also tries to fix the hwsync and delay implementation (iterate
through all slaves).
The multi plugin was designed only for hardware which runs really in sync.
Anyway, users are trying to use this plugin for other purposes.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The hw_ptr might be updated during the snd_pcm_may_wait_for_avail_min() call,
so even if it returns zero (OK), the avail must be updated again.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
All slaves should be asked to wait otherwise the write loop might
be interrupted and zero frames might be returned.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Some applications do not expect that get_period_size_min() could
return 0. Therefore these applications cannot use the null plugin without
this patch.
Due to there is no use case for having a period size of 0 this patch
disallows a period size of 0 when using the null plugin.
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
