It was missing closing brackets since its introduction.
Closes: https://github.com/alsa-project/alsa-lib/pull/470
Fixes: 4dfa8f08fb ("conf/cards: add support for pistachio-card.")
Signed-off-by: Olivier Blin <olivier.blin@softathome.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The new snd_hda_acpi driver in Linux exposes the existing Azalia
interface to non-PCI devices advertised over ACPI. Add an alias
to the existing HDA-Intel configuration file so that devices using
this driver can be discovered properly.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Install of the alsalisp binary has been disabled since 2006 (in commit
8d382ccd), and building of it was disabled by default in 2018 (in commit
32ceab21), so it is reasonable to assume that nobody is using it.
Use within the alsa-lib project is limited to an aliases file that looks
like it is intended as an example, plus some very small .alisp files
associated with the SiS SI7018 PCI sound card which has not been
manufactured in years. These too have not been installed since 2018 when
commit 32ceab21 disabled building of the alsalisp binary.
In preparing this change, I searched the Github issue tracker for
"lisp", "alisp" and "alsalisp", and found no complaints about the above
changes. I also did a Github code search for projects that might be
including the `alisp.h` header and found none. Therefore I think this
code can be safely deleted and nobody is likely to object.
Closes: https://github.com/alsa-project/alsa-lib/pull/448
Signed-off-by: Simon Howard <fraggle@soulsphere.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The hdmi.conf contains the high level macro to be used by cards to create
the hdmi: device.
Instead of including it in different config files, include it in the main
aliases.conf and remove it's inclusion by other config files.
This change is needed to add support for the hdmi: device mapping via UCM.
Closes: https://github.com/alsa-project/alsa-lib/pull/393
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This device is just an external USB soundcard with a female 3.5mm jack
for a headset, no S/PDIF | IEC958 connector. Add it to the blacklist to
prevent it being opened.
Link: https://lore.kernel.org/alsa-devel/ZeWGbxZIc7AF96h0@m.b4.vu/
Signed-off-by: David Senoner <seda18@rolmail.net>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This 7.1 analog sound card identifies as the following:
0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device (lsusb)
1 [ICUSBAUDIO7D ]: USB-Audio - ICUSBAUDIO7D (/proc/asound/cards)
It has the following four-channel analog stream layout:
Interface 1
Altset 3
Format: S16_LE
Channels: 4
Endpoint: 6 OUT (ADAPTIVE)
Rates: 44100, 48000
Bits: 16
Channel map: FL FR FC LFE
(/proc/asound/card1/stream0)
This layout makes it impossible to play audio to the surround (SL/SR)
speakers plugged into the "Surround" jack in 4 channel mode. Instead,
set six_channel so that the six-channel layout will be used to access
those speakers:
Interface 1
Altset 4
Format: S16_LE
Channels: 6
Endpoint: 6 OUT (ADAPTIVE)
Rates: 44100, 48000
Bits: 16
Channel map: FL FR FC LFE SL SR
Tested with speaker-test -Dsurround40:CARD=ICUSBAUDIO7D,DEV=0 -c4
The speaker system that required surround40 in order to downmix LFE into
the front/rear mix is a Klipsch ProMedia v.2-400, which has 4 speakers
and a subwoofer with an internal crossover, connected via front and rear
stereo analog cables.
Closes: https://github.com/alsa-project/alsa-lib/pull/319
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
There really isn't much of a point to clutter the files with this.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Userspace expects to see a HDMI pcm, so remove the somewhat broken
front and iec958 pcms and add a proper hdmi pcm instead.
The hdmi pcm supports HD/HBR audio passthrough and relays the IEC958
status bits on to the kernel driver so it can switch to HBR audio
packets if needed. The control hook is marked optional because kernels
before 5.14 didn't expose the IEC958 controls.
The default pcm never worked as dmix doesn't support the iec958 format.
So drop dmix, only use plug and softvol, and use the hdmi pcm for
iec958 formatting.
Fixes: https://github.com/alsa-project/alsa-lib/issues/229
Link: https://lore.kernel.org/alsa-devel/20220430142845.229409-1-hias@horus.com/
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The /var/lib/alsa/card<CARDNO>.conf.d configurations are loaded
to the cards.<CARDNO> tree only (overwrite mode).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The change device definitions (pcm.front etc.) from the driver
roots (cards.<DRIVER_NAME>) to the card number roots (cards.<CARDNO>).
This will allow us to do custom overrides (like UCM) in
/var/lib/alsa/card<CARDNO>.conf.d.
For dmix and dsnoop default values, use the card ID instead
the card driver name. It's more flexible.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
For the per-card configuration, add possibility to define
card number -> card driver link table.
Example:
cards.0 'cards.USB-Audio'
cards.1 'cards.USB-Audio'
cards.2 'cards.HDA-Intel'
cards.3 'cards.USB-Audio'
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Otherwise, there will be a "Digital Output(S/PDIF)-Cmedia Audio" from
Gnome UI, but there is no this physical interface on the card.
BugLink: https://github.com/alsa-project/alsa-lib/pull/122
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Dell Professional Sound Bar AE515 shows up in GNOME Settings with
a digital output that doesn't physically exist. Add it to the list
to suppress this.
BugLink: https://github.com/alsa-project/alsa-lib/pull/124
From: drjhe
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Plantronics Blackwire 3220 Series headset (USB ID 047f:c056) shows up
in GNOME Settings with a non-existent digital output. Add it to the list
to suppress this.
BugLink: https://github.com/alsa-project/alsa-lib/pull/126
From: drjhe
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
It may be handy to put extra configurations or symlinks to
the global runtime directory. The configurations may be
created at boot / hotplug event by udev or other scripts.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Intel TGL HDMI/DP codec provides 9 pins (Linux kernel, 9a11ba7388f16:
ALSA: hda: hdmi - add Tigerlake support), and with the DP MST enabled,
the linux kernel will build 11 output devices (3, 7, 8, 9, 10, 11, 12,
13, 14, 15, 16), and current alsa-lib only maps the first 8 output
devices, if users plug the HDMI/DP monitor to the last 3 ports, the
users will not see the output device from pulseaudio or gnome.
We have experienced this issue on a dell TGL machine with a dock, we
plugged 2 HDMP/DP monitors on the dock, but we could only see 1
HDMI/DP output device from pulseaudio or gnome, through investigation,
we found one monitor is plugged in the 2nd port from last.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
BugLink: https://github.com/alsa-project/alsa-lib/pull/118
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both USB audio cards on Lenovo ThinkStation P620 don't support IEC958,
so disable IEC958 accordingly.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's been some recent action to move the distribution-default setup
from /etc to /usr/etc, and we should follow that, too.
This patch adds /usr/etc/alsa.conf.d and /usr/etc/alsa.conf to the
default search paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both headset and speaker on HP Thunderbolt Dock don't support IEC958
interface.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Include $XDG_CONFIG_HOME/alsa/asoundrc _or_ ~/.config/alsa/asoundrc as
the last user-defined configuration.
BugLink: https://github.com/alsa-project/alsa-lib/issues/49
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
It seems that we have regressions for pcm.front (some
applications are using this device also for the default
raw input). Change the description and allow both
directions.
Fixes: https://github.com/alsa-project/alsa-lib/issues/39
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
ASUS Xonar AE is a PCI-Express card containing USB controller:
USB controller [0c03]: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller [1b21:1142]
and the actual USB sound card:
ID 0b05:180f ASUSTek Computer, Inc. XONAR SOUND CARD
As other Xonar USB sound cards, it uses second device for digital
output.
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
In pcms using direct plugins (dmix/dsnoop/dshare), the timestamp type could
be different from the terminating hw plugin, then the kernel driver.
Be sure such pcms have plugins using consistently the same timestamp type.
signed-off-by: Sylvain Bertrand <sylvain.bertrand@legeek.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adding a new Conexant CX2072X codec profile and reusing the existing
BYT/CHT platform snippets.
Currently tested only on ASUS E200HA laptop.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit f91cc3c7d6 ("Update chtrt5645 ucm variants to use
bytcr/PlatformEnableSeq.conf component") updated the
following 2 comments:
# codec0_out settings (used if SSP2 is connected to aif1)
# modem_out settings (used if SSP0 is connected to aif2)
Specifically it added the " to aif1" resp. " to aif2" part of the comments.
This is not correct, AIF1 / AIF2 are something which is present on
Realtek codecs only, and either one can be used indepedent of
SSP0 or SSP2 being used (the comments in the chtrt5645 UCM profile
before this change were wrong / outdated).
Besides there not being any relationship between SSP0 or SSP2 being
used, bytcr/PlatformEnableSeq.conf is also used with other codecs,
e.g. the ESS8316 codec where this is not applicable at all.
Therefor this commit removes the " to aif?" part of the comments again
to avoid confusing people reading this in the future.
Cc: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DB820c board is based of MSM8996 Qualcomm SoC, which has support for both
Digital and Analog audio. Digital audio is over HDMI and analog is over
WCD9335 codec via SLIMbus.
Board itself has HDMI port, a 3.5mm audio Jack and an Audio expansion
connector.
This patch adds support for HDMI port and 3.5mm jack.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
USB-audio device on Dell WD19 docking station provides two individual
output PCM streams, one for headphone Jack and another for speaker out
Jack. A UCM profile gives the proper roles for these.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
After recent kernel work, the kernel now sets a long-name for bytcht-es8316
boards which indicates if a single (mono) speaker or stereo speakers are
used and if in1 or in2 is used for the internal mic (the headset mic will
be on the other input).
This commit adds UCM profiles for bytcht-es8316 boards using these new
long-names, based on the generic bytcht-es8316 profile.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add an UCM profile for Bay Trail and Cherry Trail boards with an
ES8316 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST
support and add a codecs/es8316 dir with codec specific enable / disable
sequences for the various inputs and outputs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Since the Internal Analog Microphone device configuration is
identical for the rt5645 and rt5645 mono speaker UCMs, move
the entire definition to a component.
Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
