Many rt5651 devices only have a single speaker and even though there is
some external mixing done on the PCB, the quality of that mixing is quite
poor and various sounds come out garbled when relying on the on PCB mixing.
Using the codecs builtin mixer to mix left + right to the left output works
much better. This commits adds a new MonoSpeaker.conf output profile which
allows this.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Split the bytcr-rt5651 config into 1 .conf file per input / output as
has already been done for the bytcr-rt5640 and the chtnau8824 profiles.
This allows easy creation of long-name profiles with the specific input /
output combinations found on a board without needing to copy and paste
things.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Note this commit replaces the pre-existing "Handset Microphone" and
"Main Microphone" options, these come from the first commit of the
bytcr-rt5651 UCM profile and were based on wrong assumptions about the
input mappings. None of the existing devices has the Hand/Headset mic
on IN1 as these options assumed.
The rt5651 is used in various configurations with the Internal Mic(s)
hooked up to IN1, IN2, or to IN1 and IN2 and the Headset Mic hooked up
to IN3.
Add support for all these to the generic bytcr-rt5651 profile and name
them accotding to their input + functions.
A follow up commit will add specialized longname configs which
will only expose the inputs actually used on the board with that
longname.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix ADC and Mic capture volumes, so that the microphone inputs actually
work.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the generic SSP enable sequence from bytcr/PlatformEnableSeq.conf,
for boards using SSP2 this is identical the code it replaces and this
adds support for boards using SSP0.
This fixes sound not working on Bay Trail CR tablets with a rt5651 codec.
This commit also calls the generic disable sequence on shutdown
(this is new).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
pulseaudio will run the DisableSequence of the current playback device
before running the EnableSequence of the new playback device.
This causes the Platform Clock and BIAS to temporarily get turned off which
on the rt5651 breaks audio-streams which are playing when switching.
This commit moves the disabling to the EnableSequence of the other device
fixing this.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Start with all switches disabled, so that e.g. the
LOUT L/R Playback Switches are not left enabled when starting with
headphones plugged in.
This fixes the platform clock being kept on by these in some cases.
While at also move the IN? Boost and IF1 ASRC Switch lines around
a bit to match the order from https://github.com/plbossart/UCM so
the profiles can be more easily compared.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The volumes are taken from this commit:
753e2430cd
That commit also adds line-in support, so it has not been
taken in its entirety.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The headphones can either be driven directly from DAC1, or through
the HP volume mixer chain to allow volume control, both can be enabled
at the same time, but this should not be done.
Mix only DAC1 to the headphones and not the HP volume path, there
are 2 reasons to choice the DAC1 path;
1) It is the power-on-reset default
2) We don't expose the volume control to e.g. pulseaudio anyways so it
is not useful
While at it also move the "HPO MIX DAC1" and "HPO MIX HPVOL" entries up a
bit so that they are no longer inbetween the "HPO L Playback Switch" and
"HPO R Playback Switch" entries.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the generic Intel SSP bytcr/PlatformEnableSeq.conf file, it is
identical to all the cset statements this commit removes.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Other fixes include output/input names (comments) for UIs (pavucontrol)
to display, and Playback/CapturePCM entries so pulseaudio initializes
correctly on this hardware.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Cube iWork8 Air and Pipo W2S tablets both only have a single speaker.
Add long-name profiles for them which are identical to the default
chtnau8824 profile, except that they include the nau8824/MonoSpeaker.conf
snippet instead of the nau8824/Speaker.conf one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add UCM profile for chtnau8824 boards based on:
https://github.com/plbossart/UCM/blob/master/chtnau8824
Split into multiple files in the same way as this was done for the
bytcr-rt5640 support, re-using the existing ucm/PlatformEnableSeq.conf
and ucm/PlatformDisableSeq.conf files for the SST mixer settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a disable sequence powering off the SST mixer elements, loosely
based on the default DisableSequence from:
https://github.com/plbossart/UCM/blob/master/chtnau8824/HiFi.conf
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With a recently merged kernel commit, the kernel now sets a long-name for
bytcr-rt5640 boards which indicates if a single (mono) speaker or stereo
speakers are used and wether dmic1, in1 or in3 is used for the internal
mic (the headset mic sofar is always in2).
This commit adds UCM profiles for bytcr-rt5640 boards using these new
long-names, based on the generic bytcr-rt5640 profile.
The added profiles have the unnecessary input / output options from the
generic profile removed leaving only 2 input and 2 output options, which
are automatically switched between by e.g. pulse based on jack-detect.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit adds the generic UCM profile for bytcr-rt5640 boards from:
https://github.com/plbossart/UCM, plus the fixes from this pull-req:
https://github.com/plbossart/UCM/pull/31
The profile has been split up into separate per input / output files to
allow for creation of long-name profiles with the specific input / output
combinations found on a board without needing to copy and paste things.
Note this profile exports all inputs and both stereo/mono speaker setups
even though a typical device will not use all. Ideally a long-name based
device specific profile made up of the various parts should be used
instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
USB-audio device on Dell WD15 docking station provides two individual
PCM streams, one for headphone and another for line out. A UCM
profile gives the proper roles for these.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Ideapad Miix 320 uses a digital mic connected to the DMIC2 input
(unlike the Asus T100HA which has it connected to the DMIC1 input), add a
long-name config specific for the Miix 320, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for a digital mic connected to the DMIC2 input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Asus T100HA uses a digital mic rather then an analog one, add
long-name config specific for the T100HA, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for the digital mic found on the Asus T100HA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal analog mic switch is called 'Int Analog Mic Switch'
(not 'Int Mic Switch') and is connected to BST2 not BST1.
Also change the analog mic volume levels so that we get better
audio / less noise.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise, the boost value is 0, and the sound captured from that
LineIn jack is too weak for users.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:
`alsa-lib/src/conf/topology/broadwell/broadwell.conf`
This commit provides the backwards-compatible solution to fix this misuse.
This commit goes in pair with the corresponding patch for linux.
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Phiree U2SX is the successor of Phiree U2 and has the same unusual
configuration.
See ea865bba46 for reference.
Signed-off-by: Bruno Pagani <bruno.n.pagani@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a configuration for Cherry Trail boards which use a rt5645 codec
connected to a mono speaker and with an analog mic on IN2N + IN2P.
The chtrt5645-mono-speaker-analog-mic/HiFi.conf for this is based on the
latest version from https://github.com/plbossart/UCM/tree/master/chtrt5645
with all the unused input options removed and some changes made to make
the analog mic work.
This commit also adds 2 ucm dirs with the longname of 2 boards known to use
this setup, which simply contain a symlink to the generic
chtrt5645-mono-speaker-analog-mic entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous Lenovo laptops, some Gigabyte mobos have dual
HD-audio codecs and need to switch dynamically via UCM profile.
Reuse the same profile as Lenovo dual codecs, so far.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some recent Lenovo laptops have dual codecs and we need to switch them
accordingly. The kernel side already contains a fix and gives the
unique longname string for identifying the board, and here we hook up
the corresponding UCM profile.
The profile was corrected and tested by Hui Wang on Lenovo p520.
Tested-by: Kailang <kailang@realtek.com>
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UCM configuration is enabling the speakers in the SectionDefaults.
This is a problem when booting with an headset already connected since
the audio output is routed at the same time both on speakers and
heaphones until the jack is disconnected and reconnected again.
Fix this disabling all the outputs in the default mixer configuration.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conf HiFi file name is HiFi.conf, fix the name in the main
configuration file.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a UCM configuration for the rt5651 codec on Intel's Cherry-Trail
platform. Adapted from [0].
[0] https://github.com/plbossart/UCM/tree/master/bytcr-rt5651
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PulseAudio assumes that the "front" pcm device always refers to an
analog device, not HDMI. While that assumption is not really valid, the
reality is that without that assumption PulseAudio can't know whether
"front" and "hdmi" refer to a different or the same device.
The HDMI LPE driver doesn't allow audio streaming while the HDMI cable
is unplugged, so PulseAudio has to know when it's plugged in and when
it's not. If both "front" and "hdmi" devices exist, PulseAudio will
notice that HDMI is unplugged, but it doesn't know that "front" refers
to the same device, and PulseAudio will try to use the "front" device
with bad consequences. The kernel driver's refusal to stream any audio
makes PulseAudio enter an infinite loop and then the kernel kills
PulseAudio, because it consumes too much CPU time in a realtime thread.
While the looping in PulseAudio could probably be fixed, that wouldn't
change the fact that PulseAudio thinks that there is an analog device. I
believe it's best to avoid having the same device as both "front" and
"hdmi" in alsa-lib.
I removed also the surround configuration includes. I don't think they
had any effect anyway, so I wonder why they were there in the first
place.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=100488
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LPE Audio mode on BYT/CHT supports up to 3 devices, and also supports
IEC61937 passthrough. Add missing alsa-lib configurations so that
apps can use the usual -D'hdmi:CARD=X,DEV=Y,AES0=0x[4|6]' syntax, e.g.
aplay -D'hdmi:CARD=0,DEV=2,AES0=0x6' -c2 -r48000 -fs16_le
ac3_surround_test.spdif
Tested on Zotac PI330 with Onkyo receiver
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds CIC selection controls which have been added recently to
the kernel to select mic source.
Without this patch user has to manually select the control to record
from DMIC or AMIC.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The topology index in the conf is set to 1, where the driver expects index
set to 0. Fix the inconsistency.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [22eca6468b: pcm: dmix: Allow disabling x86
optimizations] introduced the new flag for dmix & co,
direct_memory_access. However, it turned out that such an addition of
the new flag in the default pcm definition causes an error when it's
used with old alsa-lib codes. Although the code added here is
correct, per se, and it works as expected, it's not wise to break the
configuration with old stuff -- even if the usage is somehow incorrect
and should be avoided.
Since the usage of the new flag is only for HDMI LPE audio, and the
usage of dmix itself should be limited with that hardware, this patch
removes the setup so that it works with the old alsa-lib again. We
may introduce the dmix behavior change in a smarter way, e.g. passing
some flag from the hardware driver so that it works more generically
without the manual fiddling of config files.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1037021
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a conf file for the VC4-HDMI sound card.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dmix plugin has some optimized implementations for x86 using the
direct memory accesses, which was rather the original version, in
addition to the "generic" implementation using the semaphore
blocking. The x86 implementation relies on the memory coherency *and*
the fast read/write on it.
For other architectures, this has been always disabled just because of
memory coherency. But, the recent LPE audio development revealed
that, even on x86 platforms, the read/write performance might become
extremely bad when the buffer is marked as uncached. Some drivers
already know the buffer is uncached, we need to switch to the generic
mode in such a case.
This patch introduces yet another flag to dmix configuration,
direct_memory_access, that indicates whether the x86-specific
optimization can be used or not. Each driver can set the flag in its
cards config namespace, and the default dmix config refers to it.
As of this patch, only HDMI LPE Audio driver sets it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's a playback-only device with a single PCM dedicated for HDMI/DP
output. The dmix is working with the latest driver code, so enable it
for default, while providing the hdmi PCM dev for the accesses with
AES bits.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds the UCM conf files for broxton enabling with rt298 codec on
I2S audio, HDMI and DMIC ports.
Signed-off-by: Nishit Sharma <nishitx.sharma@intel.com>
Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
