Move common enable sequences for rt5645 variants and rt5650
UCM configurations into a shared component. The corresponding
disable sequences are only two lines each and do not seem worth
creating components for.
Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Factor out the common enable and disable sequences used
in rt5645 variants, including the rt5650. Move the sequences
into a new component directory codecs/rt5645/ along with
a Makefile.
Some lines like
cset "name='Stereo1 ADC1 Mux' 1"
and
cset "name='I2S2 Func Switch' on"
are not set set in the chtrt5650 UCM sequences and thus are not present
in the new component, in order to maximize reuse.
Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Lenovo Ideapad Miix 320, Asus T100HA, and chtrt5645 mono variant
UCM configurations have not been updated to make use of the shared
bytcr/PlatfromEnableSeq.conf sequence. This commit deletes those
command sequences and loads the shared component directly.
Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
During my recent work on the bytcht-es8316 UCM profile I realized that the
bytcr-rt5651 devices with a single speaker use a differential setup just
like the es8316 does. The tell-tale here is the speaker going quiet when
playing the exact same sound on both channels when things are configured
for stereo speakers.
I've run some tests and the rt5651 does have a special mono balanced out
mode for its line-out but using this results in the same sound (and the
same loudness / volume of the sound) as our current solution, so adding
support for this to the kernel buys us nothing.
This commit makes no changes, it just documents my findings in a big
comment for future reference.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a config for boards which use a digital mic as internal mic,
combined with having the headset mic on in2.
An example of such a board is the Point of View TAB-P1006W-232 (v1.0) tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new ucm/codecs/rt5651/DigitalMic.conf snippet for digital mic support
and include this in the default non board-specific bytcr-rt5651.conf.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The first design with the headset-mic on IN2 rather then the
default / reference-design IN3 has shown up.
Add a new ucm/codecs/rt5651/IN2-HeadsetMic.conf snippet to deal with this
and include this in the default non board-specific bytcr-rt5651.conf.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Explicitly enable the right 'Stereo? ADC MIXL ADC?' when selecting an input,
rather then just enabling them all in ucm/codecs/rt5651/EnableSeq.conf .
This is a preparation patch for adding digital mic support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The new generation of Dell Edge IoT platform is based on Intel
Kabylake platform, and the audio codec is ALC3277 which is 100%
compatible with RT5660 in I2S mode.
The audio design on this IoT platform is as below:
- Intel kabylake platform
- connect the codec ALC3277 via SSP0
- line-out and line-in with Micbias jacks
- line-out mute control and jack detection of line-out and line-in
- two HDMI ports with audio capability
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a UCM configuration for the rt5650 codec. Tested on
a Samsung Chromebook 3. Adapted with minor modifications
from GitHub user evan-a-a's gist:
https://gist.github.com/evan-a-a/86b2a698708074530e2d0ee7c6498767
Signed-off-by: Russell Parker <russell.parker7@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Many UCM profiles include the UCM profile components under ucm/*
subdirectories and thusly put <searchdir:ucm> at each place. This is
rather cumbersome.
This patch makes the UCM parser to set the default include path, so
that each profile no longer needs to set searchdir. All the
<searchdir:ucm> lines currently found in the profiles are removed
gracefully, too.
For the needed implementation, a new helper,
_snd_config_load_with_include() is introduced. It's not exported,
only for the use inside alsa-lib.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have placed UCM profile snippets to be included by the main config
files also in the same directory, src/conf/ucm, it confuses alsaucm
program that scans over all subdirectories. It thinks such a file is
also the main config file, and spews errors like:
% alsaucm
ALSA lib utils.c:67:(uc_mgr_config_load) could not open configuration file /usr/share/alsa/ucm/bytcr/bytcr.conf
ALSA lib parser.c:1427:(load_master_config) error: could not parse configuration for card bytcr
alsaucm: unable to obtain card list: No such file or directory
Actually we already defined the subdirectory for such components, and
they are skipped at parsing the main configs. So we just need to move
the files there -- this is what's done here.
One more thing done here is to add a new component subdirectory,
platforms, for definitions bytcr/* that don't match with neither the
existing ones (codecs nor dsps).
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This Dock doesn't have IEC958 physical output, so add it to the
blacklist to prevent it being opened.
[ Also adding WD15 Dock entry that has the same problem -- tiwai ]
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The device name string for Dell WD15 (and its variants) dock is set as
"WD15Dock", while the actual device name to be used is "Dock".
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1112292
Fixes: 8ebb40c969 ("conf/ucm: Add a UCM profile for Dell WD15 Dock USB-audio")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Comment field is displayed tot the end user in various UIs as such
names like MonoSpeaker and DigitalMics without any spaces are no good.
Also the names themselves as well as how they get displayed in the
typical UI (in separate input / output tabs) makes the adding of
playback and capture to the comment superfluous and this looks weird
in the UI, so drop it.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a longname profile for devices with a mono speaker, the Internal Mic
hooked up to IN2 and the left and right channels of their headphones
output swapped.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
After recent kernel work, the kernel now sets a long-name for bytcr-rt5651
boards which indicates if a single (mono) speaker or stereo speakers are
used and if in1, in2, or in1 and 2 are used for the internal mic(s) (the
headset mic sofar is always on in3).
This commit adds UCM profiles for bytcr-rt5651 boards using these new
long-names, based on the generic bytcr-rt5651 profile.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Many rt5651 devices only have a single speaker and even though there is
some external mixing done on the PCB, the quality of that mixing is quite
poor and various sounds come out garbled when relying on the on PCB mixing.
Using the codecs builtin mixer to mix left + right to the left output works
much better. This commits adds a new MonoSpeaker.conf output profile which
allows this.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Split the bytcr-rt5651 config into 1 .conf file per input / output as
has already been done for the bytcr-rt5640 and the chtnau8824 profiles.
This allows easy creation of long-name profiles with the specific input /
output combinations found on a board without needing to copy and paste
things.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Note this commit replaces the pre-existing "Handset Microphone" and
"Main Microphone" options, these come from the first commit of the
bytcr-rt5651 UCM profile and were based on wrong assumptions about the
input mappings. None of the existing devices has the Hand/Headset mic
on IN1 as these options assumed.
The rt5651 is used in various configurations with the Internal Mic(s)
hooked up to IN1, IN2, or to IN1 and IN2 and the Headset Mic hooked up
to IN3.
Add support for all these to the generic bytcr-rt5651 profile and name
them accotding to their input + functions.
A follow up commit will add specialized longname configs which
will only expose the inputs actually used on the board with that
longname.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix ADC and Mic capture volumes, so that the microphone inputs actually
work.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the generic SSP enable sequence from bytcr/PlatformEnableSeq.conf,
for boards using SSP2 this is identical the code it replaces and this
adds support for boards using SSP0.
This fixes sound not working on Bay Trail CR tablets with a rt5651 codec.
This commit also calls the generic disable sequence on shutdown
(this is new).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
pulseaudio will run the DisableSequence of the current playback device
before running the EnableSequence of the new playback device.
This causes the Platform Clock and BIAS to temporarily get turned off which
on the rt5651 breaks audio-streams which are playing when switching.
This commit moves the disabling to the EnableSequence of the other device
fixing this.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Start with all switches disabled, so that e.g. the
LOUT L/R Playback Switches are not left enabled when starting with
headphones plugged in.
This fixes the platform clock being kept on by these in some cases.
While at also move the IN? Boost and IF1 ASRC Switch lines around
a bit to match the order from https://github.com/plbossart/UCM so
the profiles can be more easily compared.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The volumes are taken from this commit:
753e2430cd
That commit also adds line-in support, so it has not been
taken in its entirety.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The headphones can either be driven directly from DAC1, or through
the HP volume mixer chain to allow volume control, both can be enabled
at the same time, but this should not be done.
Mix only DAC1 to the headphones and not the HP volume path, there
are 2 reasons to choice the DAC1 path;
1) It is the power-on-reset default
2) We don't expose the volume control to e.g. pulseaudio anyways so it
is not useful
While at it also move the "HPO MIX DAC1" and "HPO MIX HPVOL" entries up a
bit so that they are no longer inbetween the "HPO L Playback Switch" and
"HPO R Playback Switch" entries.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the generic Intel SSP bytcr/PlatformEnableSeq.conf file, it is
identical to all the cset statements this commit removes.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Other fixes include output/input names (comments) for UIs (pavucontrol)
to display, and Playback/CapturePCM entries so pulseaudio initializes
correctly on this hardware.
Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The Cube iWork8 Air and Pipo W2S tablets both only have a single speaker.
Add long-name profiles for them which are identical to the default
chtnau8824 profile, except that they include the nau8824/MonoSpeaker.conf
snippet instead of the nau8824/Speaker.conf one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add UCM profile for chtnau8824 boards based on:
https://github.com/plbossart/UCM/blob/master/chtnau8824
Split into multiple files in the same way as this was done for the
bytcr-rt5640 support, re-using the existing ucm/PlatformEnableSeq.conf
and ucm/PlatformDisableSeq.conf files for the SST mixer settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a disable sequence powering off the SST mixer elements, loosely
based on the default DisableSequence from:
https://github.com/plbossart/UCM/blob/master/chtnau8824/HiFi.conf
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With a recently merged kernel commit, the kernel now sets a long-name for
bytcr-rt5640 boards which indicates if a single (mono) speaker or stereo
speakers are used and wether dmic1, in1 or in3 is used for the internal
mic (the headset mic sofar is always in2).
This commit adds UCM profiles for bytcr-rt5640 boards using these new
long-names, based on the generic bytcr-rt5640 profile.
The added profiles have the unnecessary input / output options from the
generic profile removed leaving only 2 input and 2 output options, which
are automatically switched between by e.g. pulse based on jack-detect.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit adds the generic UCM profile for bytcr-rt5640 boards from:
https://github.com/plbossart/UCM, plus the fixes from this pull-req:
https://github.com/plbossart/UCM/pull/31
The profile has been split up into separate per input / output files to
allow for creation of long-name profiles with the specific input / output
combinations found on a board without needing to copy and paste things.
Note this profile exports all inputs and both stereo/mono speaker setups
even though a typical device will not use all. Ideally a long-name based
device specific profile made up of the various parts should be used
instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
USB-audio device on Dell WD15 docking station provides two individual
PCM streams, one for headphone and another for line out. A UCM
profile gives the proper roles for these.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Ideapad Miix 320 uses a digital mic connected to the DMIC2 input
(unlike the Asus T100HA which has it connected to the DMIC1 input), add a
long-name config specific for the Miix 320, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for a digital mic connected to the DMIC2 input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Asus T100HA uses a digital mic rather then an analog one, add
long-name config specific for the T100HA, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for the digital mic found on the Asus T100HA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The internal analog mic switch is called 'Int Analog Mic Switch'
(not 'Int Mic Switch') and is connected to BST2 not BST1.
Also change the analog mic volume levels so that we get better
audio / less noise.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Otherwise, the boost value is 0, and the sound captured from that
LineIn jack is too weak for users.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:
`alsa-lib/src/conf/topology/broadwell/broadwell.conf`
This commit provides the backwards-compatible solution to fix this misuse.
This commit goes in pair with the corresponding patch for linux.
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Phiree U2SX is the successor of Phiree U2 and has the same unusual
configuration.
See ea865bba46 for reference.
Signed-off-by: Bruno Pagani <bruno.n.pagani@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a configuration for Cherry Trail boards which use a rt5645 codec
connected to a mono speaker and with an analog mic on IN2N + IN2P.
The chtrt5645-mono-speaker-analog-mic/HiFi.conf for this is based on the
latest version from https://github.com/plbossart/UCM/tree/master/chtrt5645
with all the unused input options removed and some changes made to make
the analog mic work.
This commit also adds 2 ucm dirs with the longname of 2 boards known to use
this setup, which simply contain a symlink to the generic
chtrt5645-mono-speaker-analog-mic entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous Lenovo laptops, some Gigabyte mobos have dual
HD-audio codecs and need to switch dynamically via UCM profile.
Reuse the same profile as Lenovo dual codecs, so far.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some recent Lenovo laptops have dual codecs and we need to switch them
accordingly. The kernel side already contains a fix and gives the
unique longname string for identifying the board, and here we hook up
the corresponding UCM profile.
The profile was corrected and tested by Hui Wang on Lenovo p520.
Tested-by: Kailang <kailang@realtek.com>
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
